S70FS01GS
1Gb (128 MB) FS-S Flash
SPI Multi-I/O, 1.8V
Features
• SPI with multi-I/O
- SPI clock polarity and phase modes 0 and 3
- DDR
- Extended addressing: 24- or 32-bit address options
- Serial command subset and footprint compatible with S25FL1-K, S25FL-P, and S25FL-S SPI families
- Multi I/O command subset and footprint compatible with S25FL-P, S25FL1-K, and S25FL-S SPI families
• Read
- Commands: Normal, Fast, Dual I/O, Quad I/O, DDR Quad I/O
- Modes: Burst wrap, Quad peripheral interface (QPI)
- Serial flash discoverable parameters (SFDP) and common flash interface (CFI), for configuration information.
• Program
- 256 or 512 bytes page programming buffer
- Program suspend and resume
- Automatic error correcting code (ECC) – Internal hardware ECC with single bit error correction
• Erase
- Hybrid sector option
• Physical set of eight 4 KB sectors and one 224 KB sector at the top or bottom of address space with all
remaining sectors of 256 KB
- Uniform sector option
• Physical uniform 256 KB blocks
- Erase suspend and resume
- Erase status evaluation
- 100,000 Program-erase cycles on any sector, minimum
- 20 year data retention, minimum
• Security features
- OTP array of 1024 bytes
- Block protection:
• Status Register bits to control protection against program or erase of a contiguous range of sectors.
• Hardware and software control options
- Advanced sector protection (ASP)
• Individual sector protection controlled by boot code or password
• Option for password control of read access
• Technology
- 65-nm MIRRORBIT™ Technology with Eclipse architecture
• Single supply voltage with CMOS I/O
- 1.7 V to 2.0 V
• Temperature range
- Industrial (–40 °C to +85 °C)
- Industrial Plus (–40 °C to +105 °C)
- Automotive, AEC-Q100 grade 3 (–40 °C to +85 °C)
- Automotive, AEC-Q100 grade 2 (–40 °C to +105 °C)
- Automotive, AEC-Q100 grade 1 (–40 °C to +125 °C)
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1 of 172
002-03833 Rev. *F
2022-05-04