RT9011
Portable Power Management 300mA Dual LDO Regulator
General Description
Features
z Wide Operating Voltage Ranges : 2.5V to 5.5V
The RT9011 is a dual channel, low noise, and low dropout
regulator sourcing up to 300mAat each channel. The range
of output voltage is from 1.2V to 3.6V by operating from
2.5V to 5.5V input.
z Low-Noise for RF Application
z No Noise Bypass Capacitor Required
z Fast Response in Line/Load Transient
z TTL-Logic-Controlled Shutdown Input
z Low Temperature Coefficient
The RT9011 offers 2% accuracy, extremely low dropout
voltage (240mV @ 300mA), and extremely low ground
current, only 27μA per LDO. The shutdown current is near
zero current which is suitable for battery-power devices.
Other features include current limiting, over temperature,
output short circuit protection.
z Dual LDO Outputs (300mA/300mA)
z Ultra-low Quiescent Current 27μA/LDO
z High Output Accuracy 2%
z Short Circuit Protection
z Thermal Shutdown Protection
The RT9011 is short circuit thermal folded back protected.
The IC lowers its OTP trip point from 165°C to 110°C when
output short circuit occurs (VOUT < 0.4V) providing
maximum safety to end users.
z Current Limit Protection
z Short Circuit Thermal Folded Back Protection
z Tiny TSOT-23-6 and 6-Lead/8-Lead/10-Lead WDFN
Packages
z RoHS Compliant and 100% Lead (Pb)-Free
The RT9011 can operate stably with very small ceramic
output capacitors, reducing required board space and
component cost. The RT9011 is available in fixed output
voltages in the TSOT-23-6, WDFN-8L2x2, WDFN-10L3x3,
WDFN-8L 3x3 and WDFN-6L 1.6x1.6 packages.
Applications
z CDMA/GSM Cellular Handsets
z Battery-Powered Equipment
z Laptop, Palmtops, Notebook Computers
z Hand-Held Instruments
Ordering Information
RT9011-
z PCMCIA Cards
z Portable InformationAppliances
Package Type
J6 : TSOT-23-6
Marking Information
QW : WDFN-8L 2x2 (W-Type)
QWA : WDFN-10L 3x3 (W-Type)
QWB : WDFN-8L 3x3 (W-Type)
QWC : WDFN-6L 1.6x1.6 (W-Type)
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Available Voltage Version
Output Voltage : VOUT1/VOUT2
VOUT2 > VOUT1 is Recommended
Note :
Code Voltage Code Voltage Code Voltage
A
D
G
K
N
R
V
Y
3.5
1.85
1.8
B
E
H
L
1.3
2.1
2
C
F
1.2
1.5
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
J
2.5
2.6
2.7
3
M
Q
T
2.8
2.85
3.2
P
S
W
3.1
` Suitable for use in SnPb or Pb-free soldering processes.
3.3
1.6
2.65
3.15
2.9
X
1.9
DS9011-08 April 2011
www.richtek.com
1