RS1GT126
RS1GT126 Single Bus Buffer Gate With 3-State Output
1 FEATURES
3 DESCRIPTIONS
The single buffer is designed for 2V to 5.5V VCC
operation. The RS1GT126 device is single line driver
with 3-state output. The output is disabled when the
output-enable input is low.
•
•
•
Operating Voltage Range: 2V to 5.5V
Low Power Consumption: 1µA (Max)
Operating Temperature Range:
-40°C to +125°C
This device is fully specified for partial-power-down
applications using Ioff. The Ioff circuitry disables the
outputs, preventing damaging current backflow
through the device when it is powered down.
•
•
•
•
Inputs Are TTL-Voltage Compatible
±32mA Output Drive at VCC=5.0V
Latch-up Performance Exceeds 100mA
Micro SIZE PACKAGES: SOT23-5,
SC70-5(SOT353)
To ensure the high-impedance state during power up
or power down, OE should be tied to GND through a
pulldown resistor, the minimum value of the resistor is
determined by the current-sourcing capability of the
driver.
2 APPLICATIONS
•
•
•
•
•
•
•
•
AV Receiver
Cable Modem Termination Systems
Digital Picture Frame (DPF)
High-Speed Data Acquisition and Generation
Motor Controls: High-Voltage
Personal Navigation Device (GPS)
Portable Media Player
The RS1GT126 is available in Green SOT23-5 and
SC70-5(SOT353) packages. It operates over an
ambient temperature range of -40°C to +125°C.
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOT23-5(5)
2.92mm×1.60mm
Video Communication Systems
RS1GT126
SC70-5
(SOT353) (5)
2.10mm×1.25mm
(1) For all available packages, see the orderable addendum at the
end of the data sheet.
Simplified Schematic
1
OE
A
FUNCTION TABLE
INPUTS
OUTPUT
Y
2
4
Y
OE
A
H
H
L
H
L
H
L
X
Z
H=HIGH Logic Level
L =LOW Logic Level
X=Don’t Care
Z=High-impedance OFF-state
REV A.1
1 / 13
www.run-ic.com