● Single Outputs up to 20A
● Input/Output 1.6kVDC Isolation
● Adjustable Output Voltage
● No Minimum Load
INNOLINE
Features
DC/DC-Converter
● Under -Voltage Lockout
● Industry Standard Footprint
● Fixed Operating Frequency
● Halt Tested
● Compact 36.83 x 57.91 x 12.7mm Package
● High Efficiency to 91%
RP50-SB
Series
50 Watt
Single
Output
Selection Guide
Part
Number
Single Output
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output
Current
(A)
Load
Regulation
(mV)
Efficiency (5)
%
87
89
90
91
RP50-481.8SB
RP50-482.5SB
RP50-483.3SB
RP50-4805SB
36 – 75
36 – 75
36 – 75
36 – 75
1.8
2.5
3.3
5.0
20
20
15
10
5.4
7.5
10
15
* add suffix “P” for positive logic ON/OFF control.
Description
The RP50-SB Series has been specifically designed for low voltage silicon applications. A wide input vol-
tage range, output voltage trim and sense inputs are all standard features. The converters also benefit
from comprehensive over-current, over-voltage and over-temperature protection.
The RP50-SB is ideally suited to telecom, network and industrial applications.
Notes:
1. Maximum output deviation is 10% inclusive of remote sense. If remote sense is not being used,
the +Vsense should be connected to its corresponding +Vout
2. Standard is negative remote ON/OFF, add suffix“P” for positive remote ON/OFF.
3. Heat sink is optional and P/N: 7G-0021, 7G-0022, 7G-0023, 7G-0024.
4. The RP50-SB meets level A and level B conducted emissions only with external components connected before
the input pin to the converter.
5. Typical value at nominal input voltage and full load.
6. BASEPLATE GROUNDING : Base-plate should be grounded at one of the four screw bolts prior to operation.
July-2006
182
www.recom-international.com