RClamp0516P
Low Capacitance RClamp®
6-Line ESD protection
PRELIMINARY
PROTECTION PRODUCTS - RailClamp®
Features
Description
RClamp®0516P provides ESD protection for high-speed
data interfaces. It features a maximum ESD withstand
voltage of ±15kV contact and ±15kV air discharge per
IEC 61000-4-2. RClamp0516P is designed to minimize
both the ESD peak clamping and the TLP clamping.
Package inductance is reduced at each pin resulting in
lower peak ESD clamping voltage. The dynamic resis-
tance is extremely low at 0.20 Ohms (typical). Maxi-
mum capacitance on each line to ground is 0.65pF
allowing the RClamp0516P to be used in applications
operating in excess of 5GHz without appreciable signal
attenuation. Each device will protect up to six lines
(three high-speed pairs).
ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±15kV (contact)
IEC 61000-4-5 (Lightning) 4A (8/20s)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Package design optimized for high speed lines
Flow-Through design
Protects six high-speed lines
Low capacitance: 0.65pF Maximum (I/O to Ground)
Low ESD clamping voltage
Low dynamic resistance: 0.20 Ohms (Typical)
Solid-state silicon-avalanche technology
Mechanical Characteristics
RClamp0516P is in an 8-pin SLP3313P6 package mea-
suring 3.3 x 1.3mm with a nominal height of 0.575mm.
The leads have a nominal pin-to-pin pitch of 0.50mm.
Flow- through package design simplifies PCB layout and
maintains signal integrity on high-speed lines.
SLP3313P6 8-pin package (3.3 x 1.3 x 0.575mm)
Pb-Free, Halogen Free, RoHS/WEEE Compliant
Lead Pitch: 0.5mm
Lead finish: NiPdAu
The combination of low peak ESD clamping, low dynamic
resistance, and innovative package design enables this
device to provide the highest level of ESD protection for
applications such as USB 3.0, HDMI 1.4, and MDDI /
mipi interfaces.
Marking: Marking Code
Packaging: Tape and Reel
Applications
USB 3.0
HDMI 1.4
uSD Card Interfaces
MMC Card Interfaces
MDDI / mipi Interfaces
Circuit Diagram
Pin Configuration
1
I/O
I/O
I/O
I/O
I/O
I/O
8
7
GND
GND
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7, 8
6
6-Line Protection
Top View
www.semtech.com
Revision 7/16/2015
1