RClamp0524J
RailClamp®
Ultra Low Capacitance TVS Arrays
PROTECTION PRODUCTS - RailClamp®
PRELIMINARY
Features
Description
RailClamps® are ultra low capacitance TVS arrays
designed to protect high speed data interfaces. This
series has been specifically designed to protect sensitive
components which are connected to high-speed data
and transmission lines from overvoltage caused by ESD
(electrostatic discharge), CDE (Cable Discharge Events),
and EFT (electrical fast transients).
ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-5 (Lightning) 5A (8/20μs)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Package design optimized for high speed lines
Flow-Through design
Protects four I/O lines
The RClampTM0524J has a typical capacitance of only
0.30pF between I/O pins. This allows it to be used on
circuits operating in excess of 3GHz without signal
attenuation. They may be used to meet the ESD
immunity requirements of IEC 61000-4-2,
Level 4 (±15kV air, ±8kV contact discharge). Each
device is designed to protect four lines (two differential
pairs).
Low capacitance: 0.3pF typical (I/O to I/O)
Low clamping voltage
Low operating voltage: 5V
Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP2710P8 8-pin package (2.7 x 1.0 x 0.58mm)
RoHS/WEEE Compliant
The RClamp0524J is in a 8-pin, RoHS/WEEE compliant,
SLP2710P8 package. It measures 2.7 x 1.0 x 0.58mm.
The leads are spaced at a pitch of 0.5mm and are fin-
ished with lead-free NiPdAu. They are designed for easy
PCB layout by allowing the traces to run straight through
the device. The combination of small size, low capaci-
tance, and high level of ESD protection makes them a
flexible solution for applications such as HDMI,
DisplayPortTM, MDDI, and eSATA interfaces.
Lead Pitch: 0.5mm
Lead finish: NiPdAu
Marking: Marking Code
Packaging: Tape and Reel per EIA 481
Applications
High Definition Multi-Media Interface (HDMI)
Digital Visual Interface (DVI)
DisplayPortTM Interface
MDDI Ports
LVDS
Serial ATA
PCI Express
Dimensions
Circuit Diagram
2.70
0.40
1
2
1.00
0.20
Pin 1
Pin 2
Pin 3
Pin 4
0.60
0.50
GND
0.58
Nominal Dimensions in mm
4-Line Protection
www.semtech.com
Revision 02/05/2008
1