RClamp0503N
RailClamp®
Low Capacitance TVS Diode Array
PROTECTION PRODUCTS - RailClamp®
Features
Description
The RailClamp® series is a family of ultra low capaci-
tance TVS arrays designed to protect high speed data
interfaces. This series has been specifically designed to
protect sensitive components which are connected to
high-speed data and transmission lines from overvoltage
caused by ESD (electrostatic discharge), CDE (Cable
Discharge Events), and EFT (electrical fast transients).
They are designed for use in applications where board
ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Array of surge rated diodes with internal TVS Diode
Small package saves board space
Protects three I/O lines and a power line
Low capacitance: 0.5pF maximum
Low clamping voltage
space is at a premium. Each device requires less than
1.5mm2 of PCB area and will protect up to three high
speed data lines.
Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1510N6 Package
The monolithic design incorporates surge rated, low
capacitance steering diodes and a TVS diode in a single
package. Each line has a maximum capacitance of
0.5pF to ground. The capacitance of each line is well
matched for consistant signal balance. A connection
to the TVS is provided for protection of an external
voltage bus, such as those found in USB applications.
This device is optimized for ESD protection of portable
electronics. They may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).
RoHS/WEEE Compliant
Nominal Dimensions: 1.45 x 1.0 x 0.58 mm
Lead Pitch: 0.5mm
Lead Finish: NiPdAu
Marking : Marking Code
Packaging : Tape and Reel
Applications
USB OTG
MMC Port
Serial ATA
Video Port
SIM Port
The RClamp0503N is in a 6-pin, RoHS/WEEE compliant,
SLP1510N6 package. It measures 1.45 x 1.0 x
0.58mm. The small package makes it ideal for use in
portable electronics such as cell phones, laptops, and
digital still cameras.
PCI Express
Circuit Diagram
Package Dimensions
1.45
2
3
1
5
1.00
1
3
4
6
6
5
4
0.50
0.58
6 Pin SLP1510N6 package (Bottom Side View)
Nominal Dimensions in mm
Device Schematic
www.semtech.com
Revision 03/31/2008
1