MODEL: R7G4HEIP-6-DA16
/C02: Polyurethane coating
/C03: Rubber coating
Remote I/O R7G4H Series
EtherNet/IP I/O MODULE
(NPN/PNP discrete input, 16 points, screw terminal block)
RELATED PRODUCTS
• PC configurator software (model: R7CFG)
Functions & Features
• EDS file
• 16 points NPN/PNP discrete input module for EtherNet/IP
• Supports DLR (Device Level Ring) to form a ring topology
The EDS files and configurator software are downloadable at
M-System’s web site.
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
130 (5.12)
GENERAL SPECIFICATIONS
Connection
EtherNet/IP: RJ-45 Moduler Jack
Power input, input: M3 separable screw terminal (torque 0.5
N·m)
55 (2.17)
Solderless terminal: Refer to the drawing at the end of the
section.
55 (2.17)
(mm)
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
MODEL: R7G4HEIP-6-DA16-R[1]
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Input to EtherNet/IP or FE to power
Status indicator LED: PWR, RUN
ORDERING INFORMATION
• Code number: R7G4HEIP-6-DA16-R[1]
Specify a code from below for [1].
(e.g. R7G4HEIP-6-DA16-R/Q)
(Refer to the instruction manual)
Discrete input status indicator LED: Green LED turns on with
input ON
• Specify the specification for option code /Q
(e.g. /C01)
Read rate: Selectable with R7CFG
■Recommended solderless terminal
TERMINAL BLOCK
3.3 (.13) max
6: Screw terminal block for power supply
RJ-45 Modular jack for communication
Screw terminal block for I/O
mm (inch)
I/O TYPE
DA16: NPN/PNP discrete input, 16 points
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
POWER INPUT
Transmission: 10BASE-T, 100BASE-TX
DC power
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
R: 24 V DC
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
Max. number of socket connections: 3
Connection type: Exclusive owner / Listen only / Input only
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
[1] OPTIONS
blank: none
Network topology: Line, star and ring
/Q: With options (specify the specification)
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
switches, the other items via PC configurator software
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
R7G4HEIP-6-DA16 SPECIFICATIONS
ES-8004-A Rev.0 Page 1/5
http://www.m-system.co.jp/