MODEL: R7G4HEIP-6-DC16A
/C02: Polyurethane coating
/C03: Rubber coating
Remote I/O R7G4H Series
EtherNet/IP I/O MODULE
(NPN transistor output, 16 points, screw terminal block)
RELATED PRODUCTS
• PC configurator software (model: R7CFG)
Functions & Features
• EDS file
• 16 points NPN transistor output module for EtherNet/IP
• Supports DLR (Device Level Ring) to form a ring topology
The EDS files and configurator software are downloadable at
M-System’s web site.
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
130 (5.12)
GENERAL SPECIFICATIONS
Connection
EtherNet/IP: RJ-45 Moduler Jack
Power input, output: M3 separable screw terminal (torque
0.5 N·m)
55 (2.17)
Solderless terminal: Refer to the drawing at the end of the
section.
55 (2.17)
(mm)
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
MODEL: R7G4HEIP-6-DC16A-R[1]
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (gray)
Isolation: Output to EtherNet/IP or FE to power
Output at the loss of communication: Configurable via
R7CFG
ORDERING INFORMATION
• Code number: R7G4HEIP-6-DC16A-R[1]
Specify a code from below for [1].
(e.g. R7G4HEIP-6-DC16A-R/Q)
Status indicator LED: PWR, RUN
• Specify the specification for option code /Q
(e.g. /C01)
(Refer to the instruction manual)
Discrete output status indicator LED: Green LED turns on
with output ON
TERMINAL BLOCK
■Recommended solderless terminal
6: Screw terminal block for power supply
RJ-45 Modular jack for communication
Screw terminal block for I/O
3.3 (.13) max
mm (inch)
I/O TYPE
DC16A: NPN transistor output, 16 points
EtherNet/IP COMMUNICATION
Communication Standard: IEEE 802.3u
POWER INPUT
DC power
Transmission: 10BASE-T, 100BASE-TX
R: 24 V DC
Baud rate: 10/100 Mbps (Auto Negotiation function)
Protocol: EtherNet/IP
(Operational voltage range: ±10 %; ripple 10 %p-p max.)
Max. number of socket connections: 3
Connection type: Exclusive owner / Listen only / Input only
Transmission media: 10BASE-T (STP, Category 5), 100BASE-
TX (STP, Category 5e)
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
Network topology: Line, star and ring
Max. length of fieldbus segment: 100 meters
IP address: 192.168.0.250 (factory setting);
Only host address in IP address is configurable via rotary
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
R7G4HEIP-6-DC16A SPECIFICATIONS
ES-8004-B Rev.1 Page 1/5
http://www.m-system.co.jp/