Not for new design. Use new F461-F464 Series.
R75
MKP Series
HIGH PERFORMANCES
METALLIZED POLYPROPYLENE FILM CAPACITOR
D.C. AND PULSE APPLICATIONS
PRODUCT CODE: R75 (Digit 12: 0 to 9)
Max
dv/dt
(V/µs) (V2/µs)
Rated
Cap.
2000Vdc / 700Vac
Max K0
Part Number
Std dimensions
single sided metallized
polypropylene film
B
H
L
p
1000 pF 4.0 10.0 18.0 15.0
1200 pF 4.0 10.0 18.0 15.0
1500 pF 4.0 10.0 18.0 15.0
1800 pF 4.0 10.0 18.0 15.0
2200 pF 4.0 10.0 18.0 15.0
2700 pF 4.0 10.0 18.0 15.0
3300 pF 4.0 10.0 18.0 15.0
3900 pF 5.0 11.0 18.0 15.0
4700 pF 5.0 11.0 18.0 15.0
5600 pF 6.0 12.0 18.0 15.0
6800 pF 6.0 12.0 18.0 15.0
8200 pF 7.5 13.5 18.0 15.0
0.010 µF 7.5 13.5 18.0 15.0
0.012 µF 8.5 14.5 18.0 15.0
0.012 µF 9.0 12.5 18.0 15.0
0.015 µF 8.5 14.5 18.0 15.0
0.015 µF 13.0 12.0 18.0 15.0
0.018 µF 10.0 16.0 18.0 15.0
0.018 µF 13.0 12.0 18.0 15.0
0.022 µF 11.0 19.0 18.0 15.0
0.027 µF 11.0 19.0 18.0 15.0
4700 pF 6.0 15.0 26.5 22.5
5600 pF 6.0 15.0 26.5 22.5
6800 pF 6.0 15.0 26.5 22.5
8200 pF 6.0 15.0 26.5 22.5
0.010 µF 6.0 15.0 26.5 22.5
0.012 µF 6.0 15.0 26.5 22.5
0.015 µF 6.0 15.0 26.5 22.5
0.018 µF 6.0 15.0 26.5 22.5
0.022 µF 6.0 15.0 26.5 22.5
0.027 µF 7.0 16.0 26.5 22.5
0.033 µF 8.5 17.0 26.5 22.5
0.039 µF 10.0 18.5 26.5 22.5
0.047 µF 10.0 18.5 26.5 22.5
0.056 µF 11.0 20.0 26.5 22.5
0.068 µF 13.0 22.0 26.5 22.5
0.047 µF 9.0 17.0 32.0 27.5
0.056 µF 9.0 17.0 32.0 27.5
0.068 µF 9.0 17.0 32.0 27.5
0.082 µF 11.0 20.0 32.0 27.5
9500 3800 E4 R75UI 1100--4--
9500 3800 E4 R75UI 1120--4--
9500 3800 E4 R75UI 1150--4--
9500 3800 E4 R75UI 1180--4--
9500 3800 E4 R75UI 1220--4--
9500 3800 E4 R75UI 1270--4--
9500 3800 E4 R75UI 1330--4--
9500 3800 E4 R75UI 1390--3--
9500 3800 E4 R75UI 1470--3--
9500 3800 E4 R75UI 1560--3--
9500 3800 E4 R75UI 1680--3--
9500 3800 E4 R75UI 1820--3--
9500 3800 E4 R75UI 2100--3--
9500 3800 E4 R75UI 2120--3--
9500 3800 E4 R75UI 2120--7--
9500 3800 E4 R75UI 2150--3--
9500 3800 E4 R75UI 2150--7--
9500 3800 E4 R75UI 2180--3--
9500 3800 E4 R75UI 2180--7--
9500 3800 E4 R75UI 2220--3--
9500 3800 E4 R75UI 2270--3--
3500 1400 E4 R75UN 1470--3--
3500 1400 E4 R75UN 1560--3--
3500 1400 E4 R75UN 1680--3--
3500 1400 E4 R75UN 1820--3--
3500 1400 E4 R75UN 2100--3--
3500 1400 E4 R75UN 2120--3--
3500 1400 E4 R75UN 2150--3--
3500 1400 E4 R75UN 2180--3--
3500 1400 E4 R75UN 2220--3--
3500 1400 E4 R75UN 2270--3--
3500 1400 E4 R75UN 2330--3--
3500 1400 E4 R75UN 2390--3--
3500 1400 E4 R75UN 2470--3--
3500 1400 E4 R75UN 2560--3--
3500 1400 E4 R75UN 2680--3--
3 sections
(2000Vdc)
All dimensions are mm.
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
The dv/dt test is carried out at 2 times the above
values.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
400 E4 R75UR 2470--3--
400 E4 R75UR 2560--3--
400 E4 R75UR 2680--4--
400 E4 R75UR 2820--4--
400 E4 R75UR 3100--3--
400 E4 R75UR 3120--3--
400 E4 R75UR 3150--4--
400 E4 R75UR 3180--3--
400 E4 R75UR 3220--4--
400 E4 R75UR 3270--3--
400 E4 R75UR 3330--4--
400 E4 R75UR 3390--3--
400 E4 R75UR 3470--4--
200 E4 R75UW3150--3--
200 E4 R75UW3180--3--
200 E4 R75UW3220--3--
200 E4 R75UW3270--3--
200 E4 R75UW3330--3--
200 E4 R75UW3390--3--
200 E4 R75UW3470--3--
200 E4 R75UW3560--4--
200 E4 R75UW3680--3--
200 E4 R75UW3820--4--
200 E4 R75UW4100--3--
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
µF 11.0 20.0 32.0 27.5
µF 13.0 22.0 32.0 27.5
µF 13.0 25.0 32.0 27.5
µF 14.0 28.0 32.0 27.5
µF 14.0 28.0 32.0 27.5
µF 18.0 33.0 32.0 27.5
µF 18.0 33.0 32.0 27.5
µF 22.0 37.0 32.0 37.5
µF 22.0 37.0 32.0 27.5
µF 11.0 22.0 41.5 37.5
µF 13.0 24.0 41.5 37.5
µF 13.0 24.0 41.5 37.5
µF 16.0 28.5 41.5 37.5
µF 16.0 28.5 41.5 37.5
µF 19.0 32.0 41.5 37.5
µF 19.0 32.0 41.5 37.5
µF 20.0 40.0 41.5 37.5
µF 20.0 40.0 41.5 37.5
µF 24.0 44.0 41.5 37.5
µF 24.0 44.0 41.5 37.5
500
500
500
500
500
500
500
500
500
500
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
09/2008
112