MODEL: R5T-RS
Internal power: Via the base (model: R5-BS)
Remote I/O R5 Series
Screw terminal: Nickel-plated steel (standard) or stainless
steel
RTD INPUT MODULE
(screw terminal block)
Isolation: Input 1 to input 2 to internal bus or internal power
Sensor type: Selectable with the side DIP SW
Temperature unit: °C, °F or absolute temperature selectable
with the side DIP SW
18 (.71)
Burnout detection: Upscale or downscale selectable with the
side DIP SW
90
(3.54)
Linearization: Standard
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
137
(5.39)
mm (inch)
INPUT SPECIFICATIONS
Maximum leadwire resistance: 200 Ω per wire (3-wire)
MODEL: R5T-RS[1][2][3]
Sensing current: ≤ 1 mA
Temperature range
ORDERING INFORMATION
• Code number: R5T-RS[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. R5T-RS2W/Q)
°C
RTD
USABLE RANGE
CONFORMANCE RANGE
Cu 10 @25°C
Cu 50
-212 to +312
-100 to +200
-236 to +560
-50 to +250
-50 to +150
-200 to +510
• Specify the specification for option code /Q
(e.g. /C01/S01)
JPt 100 (JIS ’89)
Pt 100 (JIS ’89)
Pt 100(JIS’97,IEC)(*)
Pt 1000
-240 to +900
-240 to +900
-240 to +900
-200 to +660
-200 to +850
-200 to +850
[1] NO. OF CHANNELS
1: 1 channel
Pt 50Ω (JIS ’81)
Ni 100
-236 to +700
-100 to +252
-100 to +332
-200 to +649
-80 to +250
-50 to +200
2: 2 channels
Ni 508.4Ω
°F
[2] COMMUNICATION MODE
S: Single
RTD
USABLE RANGE
CONFORMANCE RANGE
Cu 10 @25°C
Cu 50
-350 to +594
-148 to +392
-393 to +1040
-58 to +482
-58 to +302
-328 to +950
W: Dual
JPt 100 (JIS ’89)
Pt 100 (JIS ’89)
Pt 100(JIS’97,IEC)(*)
Pt 1000
-400 to +1652
-400 to +1652
-400 to +1652
-328 to +1220
-328 to +1562
-328 to +1562
[3] OPTIONS
blank: none
/Q: With options (specify the specification)
Pt 50Ω (JIS ’81)
Ni 100
-393 to +1292
-148 to +486
-148 to +630
-328 to +1200
-112 to +482
-58 to +392
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Ni 508.4Ω
(*) Factory setting.
Max. (upscale) or min. (downscale) value of the usable
range when a burnout is detected.
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 110 g (0.24 lb)
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
Input: M3.5 screw terminal block (torque 0.8 N·m)
R5T-RS SPECIFICATIONS
ES-6115 Rev.13 Page 1/3
http://www.m-system.co.jp/