MODEL: R5T-SS
Input: M3.5 screw terminal block (torque 0.8 N·m)
Remote I/O R5 Series
Internal power: Via the base (model: R5-BS)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
DC CURRENT INPUT MODULE
(screw terminal block)
Isolation: Input 1 to input 2 to internal bus or internal power
Input range: Selectable with the side DIP SW
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
18 (.71)
90
(3.54)
INPUT SPECIFICATIONS
137
■ NARROW SPAN: -1 – +1 mA, 0 – 1 mA DC
Input resistance: 1600 Ω resistor incorporated
■ WIDE SPAN: -40 – +40 mA, -20 – +20 mA 0 – 40 mA, 0 –
20 mA, 4 – 20 mA DC
(5.39)
mm (inch)
MODEL: R5T-SS[1][2][3]
Input resistance: 40 Ω resistor incorporated
ORDERING INFORMATION
• Code number: R5T-SS[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. R5T-SS2W/Q)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 110 g (0.24 lb)
• Specify the specification for option code /Q
(e.g. /C01/S01)
PERFORMANCE
Conversion accuracy: ±0.1 %
[1] NO. OF CHANNELS
1: 1 channel
Data range: 0 – 10000 of the input range
Data allocation: 1 (2 for 2-channel type)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input 1 to input
2 to internal bus or internal power)
2: 2 channels
[2] COMMUNICATION MODE
S: Single
W: Dual
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
[3] OPTIONS
blank: none
/Q: With options (specify the specification)
STANDARDS & APPROVALS
EU conformity:
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
/C02: Polyurethane coating
/C03: Rubber coating
EN 50581
TERMINAL SCREW MATERIAL
/S01: Stainless steel
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
R5T-SS SPECIFICATIONS
ES-6144 Rev.7 Page 1/3
http://www.m-system.co.jp/