MODEL: R5T-DC4
steel
Remote I/O R5 Series
Isolation: Do1 or Do2 to Do3 or Do4 to internal bus or
internal power
DISCRETE OUTPUT MODULE
(screw terminal block; relay contact output, 4 points)
18 (.71)
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
Output status indicator: Red LED; turns on with the outputs
ON.
90
(3.54)
OUTPUT SPECIFICATIONS
Output: Relay contact, 4 points
137
(5.39)
Common: Every 2 points
mm (inch)
Rated load: 250 V AC @ 0.5 A (cos ø = 1)
30 V DC @ 0.5 A (resistive load)
Maximum switching voltage: 250 V AC or 30 V DC
Maximum switching power: 250 VA or 150 W
Minimum load: 1 V DC @ 1 mA
MODEL: R5T–DC4[1][2]
ORDERING INFORMATION
Code number: R5T-DC4[1][2]
Mechanical life: 2 × 10 cycles (rate 300/min.)
7
When driving an inductive load, external contact protection
and noise quenching recommended.
Specify a code from below for each of [1] and [2].
(e.g. R5T-DC4W/Q)
• Specify the specification for option code /Q
(e.g. /C01/S01)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 110 g (0.24 lb)
NO. OF CHANNELS
4: 4-point outputs
[1] COMMUNICATION MODE
S: Single
PERFORMANCE
Data allocation: 1
W: Dual
Response time: ≤ 0.1 sec.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (Do 1 or Do 2 to
Do 3 or Do 4 to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
Output: M3.5 screw terminal block (torque 0.8 N·m)
Internal power: Via the base (model: R5-BS)
Screw terminal: Nickel-plated steel (standard) or stainless
R5T-DC4 SPECIFICATIONS
ES-6129 Rev.9 Page 1/3
https://www.m-system.co.jp/