MODEL: R5T-DS
Remote I/O R5 Series
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
Input: M3.5 screw terminal block (torque 0.8 N·m)
Internal power: Via the base (model: R5-BS)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
4 – 20 mA INPUT MODULE
(screw terminal block; 2-wire transmitter excitation supply)
18 (.71)
Isolation: Input 1 to input 2 to internal bus or internal power
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
90
(3.54)
137
(5.39)
mm (inch)
SUPPLY OUTPUT
Output voltage: 24 – 29 V DC with no load
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
MODEL: R5T-DS[1][2][3]
Current limited: 30 mA max.
Protected time duration: No limit
ORDERING INFORMATION
Code number: R5T-DS[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. R5T-DS2W/S/Q)
INPUT SPECIFICATIONS
Input: 4 – 20 mA DC; input resistor incorporated
• Specify the specification for option code /Q
(e.g. /C01/S01)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 110 g (0.24 lb)
[1] NO. OF CHANNELS
1: 1 channel
2: 2 channels
[2] COMMUNICATION MODE
S: Single
PERFORMANCE
Conversion accuracy: ±0.05 %
W: Dual
Data range: 0 – 10000 of the input range
Data allocation: 1 (2 for 2-channel type)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.2 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input 1 to input
2 to internal bus or internal power)
[3] OPTIONS (multiple selections)
Input resistance
blank: 100 Ω
/S: 250 Ω (for smart transmitters)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
STANDARDS & APPROVALS
EU conformity:
/C02: Polyurethane coating
EMC Directive
/C03: Rubber coating
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
TERMINAL SCREW MATERIAL
/S01: Stainless steel
EN 50581
R5T-DS SPECIFICATIONS
ES-6119 Rev.8 Page 1/3
http://www.m-system.co.jp/