MODEL: R3-PC16A
Remote I/O R3 Series
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R3-BSx)
Output: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R3-BSx)
Screw terminal: Nickel-plated steel
PULSE OUTPUT MODULE
(open collector output, 16 points)
27.5 [1.08]
Isolation: Output to internal bus or internal power
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Bi-color (red/green) LED;
Red with external power supply abnormality;
Green in normal operating conditions.
Output status indicator: Red LED; turns on with the output
ON.
130
[5.12]
109
[4.29]
mm [inch]
Pulse width adjustment: Side DIP SW
MODEL: R3-PC16A[1][2]
OUTPUT SPECIFICATIONS
Output: Open collector, 16 points
ORDERING INFORMATION
• Code number: R3-PC16A[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3-PC16AW/CE/Q)
Max. frequency: 100 Hz (selectable with DIP SW)
Max. ouptut pulse number per setting: 2000
(No output when a number greater than 2000 is set.)
Totalized pulse range: 1 – 10000 (‘0’ at reset only)
Max. pulse range selectable from 1 to 65535 using the
R3CON PC Configurator Software. Refer to the R3CON Users
Manual for detailed information.
• Specify the specification for option code /Q
(e.g. /C01)
NO. OF CHANNELS
Count at overflow: Reset and restart at ‘1.’
Rated load voltage: 24 V DC ±10 %
16: 16
Maximum load current: 0.1 A per point
OUTPUT
A: Open collector
Maximum rush current: 0.5 A for max. 10 msec.
Maximum leak current at OFF: 0.1 mA
Maximum voltage drop at ON: 0.1 V DC typical; 1.2 V DC
max.
[1] COMMUNICATION MODE
S: Single
Common: All 16 points (2 terminals)
W: Dual
Common current: Max. 1.6 A per common
External power supply: 24 V DC ±10 % approx. 0.02 A
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 200 g (0.44 lb)
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
PERFORMANCE
Data allocation: 16
Current consumption: Approx. 100 mA
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(output to internal bus or internal power)
/C02: Polyurethane coating
/C03: Rubber coating
R3-PC16A SPECIFICATIONS
ES-8408 Rev.10 Page 1/4
https://www.m-system.co.jp/