MODEL: R3-NML3
Max. number of slaves: 62
(The maximum number of slaves might change depending
on the master unit. Refer to the manual of the master unit)
Input output data length: 16/32/48/64 byte (Function
selected with DIP SW on side panel)
12(16 byte setting)
28(32 byte setting)
44(48 byte setting)
60(64 byte setting)
Station address: 03H - EFH
(Function selected with Rotary SW)
Available communication mode:
Cyclic communication mode: For cyclic communication and
message communication
Event-driven communication mode: For Event-driven
communication
Other slaves monitoring: Not supported
LNK 1 LED: ON at normal communication
LNK 2 LED: ON at normal communication
INSTALLATION
Power consumption
•AC:
Approx. 25 VA at 100 V
Approx. 30 VA at 200 V
•DC: Approx. 15 W
Current consumption (no power supply): 110 mA
Output current (power supply): 250 mA continuous at 20 V
DC; 400 mA for 10 minutes
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 200 g (0.44 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1000 V AC @ 1 minute (MECHATROLINK
to internal bus or internal power to power input to RUN
output to FG)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
R3-NML3 SPECIFICATIONS
ES-8336 Rev.6 Page 2/5
https://www.m-system.co.jp/