MODEL: R3-NMW1F
Remote I/O R3 Series
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODBUS INTERFACE MODULE
(Modbus Wired Communication, Modbus-RTU Transparent
900 MHz Band Devices Use)
/C02: Polyurethane coating
/C03: Rubber coating
FUNCTIONS & FEATURES
• Equipped with 900 MHz band wireless device
• Uses Modbus-RTU protocol wired com. as main network,
and monitors I/O signal with wireless
(
)
27.5 1.08
• Available to use wireless device as main network
• Wireless deive incorporates a module conforming to FCC
part 15, and can be used within the United States only.
• Modbus-RTU gateway function available, outputs data
received with wireless to wired network
280
11.02
(
)
RELATED PRODUCTS
For the details of the wireless device related products,
154
(
)
6.06
please refer to M-system website.
mm (inch)
• PC configurator software (model: R3CON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
MODEL: R3–NMW1F-[1][2]
ORDERING INFORMATION
• Code number: R3-NMW1F-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3-NMW1F-N/E/Q)
Maintenance software
Maintenance console: MH920 Console for International
(model: MH920CI) (OKI)
(Maintenance software is downloadable at M-System’s web
site.)
• Specify the specification for option code /Q
(e.g. /C01)
Coaxial cable
• 7.5 m extension cable for rooftop antenna (model: CX-
SAC0SAD0Q0750) (OKI)
[1] POWER INPUT
N: No power supply
AC Power
PACKAGE INCLUDES...
• Terminating resistor (110 Ω, 0.25 W)
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V,
47 – 66 Hz)*
DC Power
GENERAL SPECIFICATIONS
Connection
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.) *
* Not selectable for use with independent power modules or
network modules with the internal power input options.
Wireless network: SMA coaxial connector
Wired network: Tension clamp terminal (Front Twin
connection)
Applicable wire size: 0.2 - 1.5 mm , stripped length: 10 mm
2
[2] OPTIONS (multiple selections)
Antenna
Internal bus: Via the Installation Base (model: R3-BSx)
Internal power: Via the Installation Base (model: R3-BSx)
Power input, RUN contact output: M3 separable screw
terminal (torque 0.5 N·m)
/S: Sleeve antenna
/E: Rooftop antenna
Other Options
Maintenance: Mini USB type B female connector
Screw terminal: Nickel-plated steel
blank: none
/Q: Option other than the above (specify the specification)
Isolation: Modbus to internal bus or internal power or
R3-NMW1F SPECIFICATIONS
ES-8286 Rev.1 Page 1/12
http://www.m-system.co.jp/
5秒后页面跳转
资料手册解读：UC3842参数和管脚说明
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
PCF8574资料解读：主要参数分析、引脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
