Nitrogen Calibration Manifolds
QTCM (3000 psi / 210 bar), QSCM (5000 psi / 350 bar)
The most economical solution for doing static pressure
calibrations with compressed nitrogen gas.
Features:
•ꢀ Availableꢀinꢀbothꢀbrassꢀ(3000ꢀpsiꢀ/ꢀ210ꢀbar)ꢀandꢀstainlessꢀsteelꢀ(5000ꢀ
psi / 350 bar) models
•ꢀ Fineꢀadjustmentꢀpistonꢀprovidesꢀpreciseꢀpressureꢀcontrolꢀinsteadꢀofꢀ
trying to make adjustments with a pressure regulator and a needle
valve
•ꢀ Soft-seatedꢀvalvesꢀmakeꢀfillingꢀandꢀventingꢀtheꢀsystemꢀveryꢀprecise
•ꢀ Compactꢀdesignꢀallowsꢀtheꢀmanifold,ꢀgaugeꢀadapterꢀandꢀhosesꢀtoꢀfitꢀ
in the included nylon bag
•ꢀ Becauseꢀpressureꢀisꢀcontrolledꢀatꢀtheꢀdeviceꢀunderꢀtest,ꢀtheꢀnitrogenꢀ
cylinder can be mounted on a truck
•ꢀ LowꢀvolumeꢀQuick-testꢀhose,ꢀgaugeꢀadapterꢀandꢀprocessꢀconnectionꢀ
reduce gas usage and make nitrogen cylinders last longer
•ꢀ MadeꢀinꢀU.S.A.
Specifications
Type of Manifold
Maximum pressure
Pressure media
Fine adjust resolution
Reference connection
Inlet port
QTCM (brass) manifolds
QSCM (stainless steel) manifolds
5000 psi (350 bar)
3000 psi (210 bar)
Compressed nitrogen
Compressed nitrogen
0.1 psi (6.9 mbar)
0.1 psi (6.9 mbar)
Brass - see below
Stainless steel - see below
Female Quick-test, brass (QTHA-3SBA)
(2) male Quick-test, brass (QTHA-3SB0)
20’(6.1 m) long with check-valve 1 end, brass (QTQC-HOS-20’)
2’(0.6 m) long, brass (QTQT-HOS-2’)
(2) 1/4”male NPT, brass (QTHA-2MB0)
Brass, stainless steel fine adjust assembly
Buna-N,Teflon™, Delrin™
Female Quick-test, stainless steel (QTHA-3SSA)
(2) male Quick-test, stainless (QTHA-3SS0)
20’(6.1 m) long, check-valve 1 end, stainless steel (QTQN-HOS-20’)
2’(0.6 m) long, stainless steel (QSQS-HOS-2’)
(2) 1/4”male NPT, stainless steel (QTHA-2MS0)
Stainless steel
Outlet ports
Quick-test inlet hose
Quick-test outlet hose
Process connections
Construction
Seal material
Buna-N,Teflon™, Delrin™
Weight
2.2 lb (1.0 kg)
2.2 lb (1.0 kg)
Ordering information
QTCM (brass) manifolds with NPT connections:
Model
Description
QTCM-1MBA-20’-2’
QTCM-2MBA-20’-2’
QTCM-2FBA-20’-2’
QTCM-0000-0-0
1/8”male NPT, gauge adapter (QTHA-1MBA), 2 hoses, 2 process connections
1/4”male NPT, gauge adapter (QTHA-2MBA), 2 hoses, 2 process connections
1/4”female NPT, gauge adapter (QTHA-2FBA), 2 hoses, 2 process connections
QTCM only, no gauge adapter, no hoses, no process connections
QSCM (stainless steel) manifolds with NPT connections
Model
Description
QSCM-1MSA-20’-2’
QSCM-2MSA-20’-2’
QSCM-2FSA-20’-2’
QSCM-0000-0-0
1/8”male NPT, gauge adapter (QTHA-1MSA), 2 hoses, 2 process connections
1/4”male NPT, gauge adapter (QTHA-2MSA), 2 hoses, 2 process connections
1/4”female NPT, gauge adapter (QTHA-2FSA), 2 hoses, 2 process connections
QSCM only, no gauge connection, no hoses, no process connections
For manifolds with custom length hoses change first hose (inlet) or second hose (outlet) to desired length. Contact your Ralston Instruments dealer or the
factory for pricing on custom length hoses. For accessories, repair kits and hoses see page 17. For a complete list of accessories and parts see product manual or
detailed specification sheet. For a list of the most commonly used gauge and process connections see page 18. For a complete list refer to Ralston Instruments
Pressure Connection catalog. Contact your Ralston Instruments dealer or the factory for information on reference gauges and pressure calibration kits.
Ralston Instruments, LLC
www.ralstoninst.com
1.800.347.6575