5秒后页面跳转
QFN-24 PDF预览

QFN-24

更新时间: 2024-11-20 12:01:47
品牌 Logo 应用领域
德州仪器 - TI 放大器
页数 文件大小 规格书
34页 1090K
描述
Digital Input Class-D Speaker Amplifier with Audio Processing and mono headphone amplifier

QFN-24 数据手册

 浏览型号QFN-24的Datasheet PDF文件第2页浏览型号QFN-24的Datasheet PDF文件第3页浏览型号QFN-24的Datasheet PDF文件第4页浏览型号QFN-24的Datasheet PDF文件第5页浏览型号QFN-24的Datasheet PDF文件第6页浏览型号QFN-24的Datasheet PDF文件第7页 
TAS2505  
www.ti.com  
SLAS778A FEBRUARY 2013REVISED FEBRUARY 2013  
Digital Input Class-D Speaker Amplifier with Audio Processing and mono headphone  
amplifier  
Check for Samples: TAS2505  
1 INTRODUCTION  
1.1 Features  
1.2 Applications  
12  
• Digital Input Mono Speaker Amp  
Portable Audio Devices  
White goods  
• Supports 8-kHz to 96-kHz Sample Rates  
• Mono Class-D BTL Speaker Driver (2 W Into  
Portable Navigation Devices  
4 or 1.7 W Into 8 )  
• Mono Headphone Driver  
• Two Single-Ended Inputs With Output Mixing  
and Level Control  
• Embedded Power-on-Reset  
• Integrated LDO  
1.3 Description  
The TAS2505 is a low power digital input speaker  
amp with support for 24-bit digital I2S data mono  
playback.  
• Programmable Digital Audio Processing Blocks  
for Bass Boost, Treble, EQ With up to Six  
Biquads for Playback  
In addition to driving a speaker amp upto 4-Ω, the  
device also features a mono headphone driver and a  
programmable digital-signal processing block. The  
digital audio data format is programmable to work  
with popular audio standard protocols (I2S, left/right-  
justified) in master, slave, DSP and TDM modes. The  
programmable digital-signal processing block can  
support Bass boost, treble, or EQ functions. An on-  
chip PLL provides the high-speed clock needed by  
the digital signal-processing block. The volume level  
can be controlled by register control. The audio  
functions are controlled using the I2C™ serial bus or  
SPI bus. The device includes an on-board LDO that  
runs off the speaker power supply to handle all  
internal device analog and digital power needs. The  
included POR as power-on-resetcircuit reliably resets  
the device into its default state so no external reset is  
required at normal usage; however, the device does  
• Integrated PLL Used for Programmable Digital  
Audio Processing Blocks  
• I2S, Left-Justified, Right-Justified, DSP, and  
TDM Audio Interfaces  
• I2C Control and SPI control with auto-increment  
• Full Power-Down Control  
• Power Supplies:  
– Analog: 1.5 V–1.95 V  
– Digital Core: 1.65 V–1.95 V  
– Digital I/O: 1.1 V–3.6 V  
– Class-D: 2.7 V–5.5 V (SPKVDD AVDD)  
• 24-Pin QFN Package (4mm × 4mm)  
have  
a
reset pin for more complex system  
initialization needs. The device also includes two  
analog inputs for mixing and muxing in both speaker  
and headphone analog paths.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
I2C is a trademark of NXP B.V. Corporation.  
2
PRODUCTION DATA information is current as of publication date. Products conform to  
specifications per the terms of the Texas Instruments standard warranty. Production  
processing does not necessarily include testing of all parameters.  
Copyright © 2013, Texas Instruments Incorporated  

与QFN-24相关器件

型号 品牌 获取价格 描述 数据表
QFN-28 ETC

获取价格

QFN测试座 QFN-28测试座 BGA测试座 IC测试座
QFN36-P-0606-0.50 TOSHIBA

获取价格

QFN36
QFN3X3-16 GMT

获取价格

Package Outline
QFN-40 SILICON

获取价格

Low-power sleep mode On-hook transmission Loop or ground start operation Smooth polarity r
QFN4040-16 DIODES

获取价格

HIGH EFFICIENCY 1X/1.5X/2X CHARGE PUMP FOR WHITE LED APPLICATIONS
QFN48-P-0707-0.50 TOSHIBA

获取价格

QFN48
QFN4X4-16 GMT

获取价格

Package Outline
QFN4X4-24 GMT

获取价格

Package Outline
QFN4X5-34 GMT

获取价格

Package Outline
QFN52 ONSEMI

获取价格

CONTROLLING DIMENSION MILLIMETERS