Count
Count
Chkd
Description of revisions
Chkd Date
Description of revisions
Date
By
By
△
△
△
△
Applicable standard
Operating
temperature range
Storage
temperature range
-10℃ ~ +50℃(Packed Condition)
50Ω (0 to 6GHz)
-40℃ ~ + 105℃
Characteristic
impedance
Rating
Power
---W
---
Applicable
cable
Ø 3.0 (Coaxial cable)
Peculiarity
SPECIFICATIONS
TEST METHOD
ITEM
CONSTRUCTION
General examination
REQUIREMENTS
QT AT
According to drawing.
Visually and by measuring instrument.
Confirmed visually.
O
O
O
O
Marking
ELECTRICAL CHARACTERISTICS
Contact resistance
Insulation resistance
Mate applicable connector and apply a current of
Center contact : 30 mΩ Max.
Outer contact : 30 mΩ Max.
(Except for resistance of cable.)
100 MΩ Min.
1 mA AC(Or 1,000Hz).
O
-
Mate applicable connector and apply a voltage of
DC 500 V.
O
O
-
-
Voltage proof
Mate applicable and apply a voltage of
AC 500 V for 1 min.
No flashover or breakdown.
VSWR 1.5 Max.
Voltage standing wave ratio
Frequency 0 to 6GHz.
O
-
MECHANICAL CHARACTERISTICS
Mechanical operation
30 times insertions and extractions.
① Contact resistance
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
(Except for resistance of cable.)
O
-
② No damage, crack and looseness of parts.
① No electrical discontinuity of 1㎲.
980 m/s2 direction of pulse 6ms at 10 times
in 3 directions.
Shock
② Contact resistance
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
O
-
-
(Except for resistance of cable)
③ No damage, crack and looseness of parts.
ENVIRONMENTAL CHARACTERISTICS
Rapid change of temperature
Temperature : -40±2 → 15~35 → +105±2 → 15~35 ℃ ① Contact resistance
(NOTE 1)
Time :
Under 200 cycles.
Exposed at 25±2 ℃, 65 % 25 h.
30
→
5
→
30
→ 5 min
Center contact : 50 mΩ Max.
Outer contact : 50 mΩ Max.
O
Damp heat, cycle
(NOTE 1)
(Except for resistance of cable)
② No damage, crack or looseness of parts.
③ Insulation resistance : 10 MΩ Min.
O
-
Under 10 cycles.
Drawn
Designed
Checked
Approved
Released
Remarks conditions for testing
ENG
G.S CHOI
20.05.29
G.S CHOI
D.G KIM
H.S KIM
20.05.29
DEPT
20.05.29
20.05.29
20.05.29
Note QT: Qualification test AT: Assurance test O: Applicable test
Part No.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
POK19-LP-1.5D PLUG(800)
Code No.(OLD)
Drawing No.
Code No.
1
CL 6341-0020-8-800
F-1-021(Rev.0)
2
ELC4-633117
CL