COUNT
COUNT DESCRIPTION OF REVISIONS
DESCRIPTION OF REVISIONS
CHKD
CHKD DATE
DATE
BY
BY
△
△
△
△
APPLICABLE STANDARD
OPERATING
STORAGE TEMPERATURE
RANGE
-10℃ ~ +50℃(Packed Condition)
-40℃ ~ + 105℃
TEMPERATURE RANGE
CHARACTERISTIC
IMPEDANCE
APPLICABLE
CABLE
POWER
RATING
--W
1A
50Ω(0 TO 6GHz)
CURRENT
-
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measufing instrument.
Confirmed visually.
O
O
According to drawing.
ELECTRICAL CHARACTERISTICS
Contact resistance
open circuit voltage is AC 20mV Max, 1kHz
Initial : Center 30mΩ Max./Outer contact : 60mΩ Max.
After : Center 50mΩ Max./Outer contact : 300mΩ Max.
Initial : 100 MΩ Min.
O
O
O
-
-
-
/test current is AC 1mA
Insulation resistance
Mate applicable connector and apply a voltage of
DC 500 V.
After : 10MΩ Min.
Voltage proof
Mate applicable and apply a voltage of AC 500 V
for 1 min.
No dielectric breakdown.
Voltage standing wave ratio
Frequency 0 to 6GHz
1.49 Max[Floating Max/Normal/Min]
O
O
-
-
Insertion loss
Frequency 0 to 6GHz
-1.5dB Min[Floating Max/Normal/Min]
75N Max
MECHANICAL CHARACTERISTICS
Measured by applicable connector in vertical
(Speed 50mm/min)
Insertion and withdrawal force
O
O
-
-
Mechanical operation
30 times insertions and extractions.
① Contact resistance
Center : 50mΩ Max./Outer : 300 mΩ Max.
② Insertion and withdrawal force : 75N Max.
③ No damage, crack and looseness of parts.
④ VSWR 1.49 Max .
Shock
3 both axial directions, 3 times each, 18 times in total
(Acceleration : 980 m/s2, Duration : 6ms)
① Contact resistance
[IEC60068-2-27]
Center : 50mΩ Max./Outer : 300 mΩ Max.
② Insertion and withdrawal force : 75N Max.
③ No damage, crack and looseness of parts.
④ VSWR 1.49 Max.
O
O
-
-
Frequency 60 to 500Hz, acceleration of 49m/s2,
full amplitude of 0.7mm, in 3 axis directions for 11 min.
Test for 24 hours in total
Vibration
[IEC 60068-2-6]
⑤ No Electrical discontinuity of 1㎲.
ENVIRONMENTAL CHARACTERISTICS
Rapid change of temperature
[IEC60068-2-14]
Temperature : -40±2 → 15~35 → +105±2 → 15~35 ℃ ① Contact resistance
Time :
min.
30
→
2~3 → 30
→ 2~3
Center : 50mΩ Max./Outer : 300 mΩ Max.
② Insertion and withdrawal force : 75N Max.
③ No damage, crack and looseness of parts.
④ VSWR 1.49 Max.
O
O
-
-
Uunder 96 / 1000 Cycles.
Temperature : -10 → +65℃
Humidity : 90~96%
Damp heat, cycle
[IEC60068-2-38]
10 Cycle(240Hr)
⑤ Insulation resistance : 10 MΩ Min.
Damp heat(Steady state)
[IEC-60068-2-3]
Dry heat
Exposed at 60±2℃, 90~95%, 96Hr / 1000Hr
Exposed at 105±2℃, 96Hr / 1000Hr
Exposed at -40±2℃, 96Hr / 1000Hr
O
O
O
-
-
-
[IEC60068-2-2]
Cold
[IEC60068-2-1]
DRAWN
DESIGNED
CHECKED
APPROVED
RELEASED
REMARKS CONDITIONS FOR TESTING
ENG
G.S CHOI G.S CHOI
22.08.30
H.S KIM
22.08.30 22.08.30 22.08.30
H.S KIM
23.12.27
DEPT
UNLESS OTHERWISE SPECIFIED, REFER TO JIS C 5402.
NOTE QT: QUALIFICATION TEST AT: ASSURANCE TEST O: APPLICABLE TEST
SPECIFICATION SHEETPART NO.
HIROSE KOREA CO.,LTD.
POK22F-PR/A-SMT(800)
CODE NO.(OLD)
DRAWING NO.
CODE NO.
1
CL 6341-0022-3-800
2
ELC4-634167
CL