PCM5100, PCM5101, PCM5102
www.ti.com
SLAS764 –MAY 2011
2V DirectPath™, 112/106/100dB Audio Stereo DAC with 32-bit, 384kHz PCM Interface
RMS
Check for Samples: PCM5100, PCM5101, PCM5102
1
FEATURES
DESCRIPTION
23
•
Hardware Control
The PCM510x devices are a family of monolithic
CMOS integrated circuits that include a stereo
digital-to-analog converter and additional support
circuitry in a small TSSOP package. The PCM510x
uses the latest generation of TI’s advanced segment
DAC architecture to achieve excellent dynamic
performance and improved tolerance to clock jitter.
•
Analog Performance (3.3V Power Supply)
–
–
–
–
–
–
SNR: 112/106/100dB (Typical)
Dynamic Range: 112/106/100dB (Typical)
THD+N: - 93/-92/90dB @ - 1dBfs (Typical)
Full Scale Output: 2.1VRMS (Ground Center)
No DC Blocking Capacitors Required
Market leading low out of band noise.
The PCM510x devices are simpler hardware
controlled 2VRMS DACs, with filter select, PLL and
auto-mute functions.
•
•
Digital Filter Latency & Performance Select
Normal 8× Oversampling Digital Filter:
The PCM510x provides 2.1VRMS ground centered
outputs, allowing designers to eliminate DC blocking
capacitors on the output, as well as external muting
circuits traditionally associated with single supply line
drivers.
–
–
Stopband Attenuation: –60dB
Passband Ripple: ±0.02dB
•
Low Latency 8× Oversampling Digital Filter:
–
–
Stopband Attenuation: –52dB
Passband Ripple: ±0.0001dB
The integrated line driver surpasses all other
charge-pump based line drivers by supporting loads
down to 1kΩ.
•
•
Sampling Frequency: 8kHz To 384kHz
System Clock Multiples (fSCK): 64, 128, 192,
256, 384, 512, 768, 1024, 1152, 1536, 2048, 3072
Accepts 16-, 24-, And 32-Bit Audio Data
PCM Data Formats: I2s, Left-Justified
Intelligent Muting System, Soft Up/Down Ramp
& Analog Mute For 120dB Mute SNR With
Popless Operation.
Integrated Power On Reset
Integrated Negative Charge Pump
Integrated High-Performance Audio PLL With
BCK Reference To Generate SCK Internally
Automatic Power-Save Mode When LRCK And
BCK Are Deactivated.
By supporting loads down to 1kΩ, the PCM510x can
essentially drive up to 10 products in parallel. (LCD
TV, DVDR, AV Receivers etc).
•
•
•
The integrated PLL on the device removes the
requirement for a system clock (commonly known as
master clock). This allows a 3-wire I2S connection,
along with reduced system EMI.
•
•
•
Intelligent clock error and PowerSense under voltage
protection utilizes a two level mute system for
pop-free performance. Upon clock error or system
power failure, the device digitally attenuates the data
(or last known good data), then mutes the analog
circuit
•
•
•
Internal Pop-Free Control For Sample-Rate
Changes Or Clock Halts
Single Supply Operation:
Compared with existing DAC technology, the
PCM510x family offers up to 20dB lower out-of-band
noise, reducing EMI and aliasing in downstream
amplifiers/ADCs. (from traditional 100kHz OBN
measurements all the way to 3MHz)
–
3.3V Analog, 3.3V Digital
•
•
3.3V Failsafe LVCMOS Digital Inputs
Small 20-pin TSSOP Package
The PCM510x accepts industry-standard audio data
formats with 16- to 32-bit data. Sampling rates up to
384kHz are supported.
APPLICATIONS
•
•
•
•
A/V Receivers
DVD, BD Players
HDTV Receivers
Other Applications Requiring 2Vrms output
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
System Two Cascade, Audio Precision are trademarks of Audio Precision.
DirectPath is a trademark of Texas, Instruments, Inc..
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated