PCM5102-Q1
www.ti.com
SLAS832A –MARCH 2012–REVISED MARCH 2012
2V DirectPath™, 112/106/100dB Audio Stereo DAC with 32-bit, 384kHz PCM Interface
RMS
Check for Samples: PCM5102-Q1
1
FEATURES
Typical Performance (3.3V Power Supply)
23
•
Qualified for Automotive Applications
Parameter
PCM5102 / PCM5101 /
PCM5100
•
AEC-Q100 Qualified with the following results:
–
Device Temperature Grade 2: –40°C to
105°C Ambient Operating Temperature
Range
SNR
112 / 106 / 100dB
112 / 106 / 100dB
–93 / –92 / –90dB
2.1VRMS (GND center)
Dynamic Range
THD+N at - 1dBFS
Full Scale Output
–
–
Device HBM ESD Classification Level H2
Device CDM ESD Classification Level C3B
Normal 8× Oversampling Digital Filter Latency: 20/fS
Low Latency 8× Oversampling Digital Filter Latency: 3.5/fS
•
•
Market-Leading Low Out-of-Band Noise
Sampling Frequency
8kHz to 384kHz
Selectable Digital-Filter Latency and
Performance
System Clock Multiples (fSCK): 64, 128, 192, 256, 384, 512,
768, 1024, 1152, 1536, 2048, 3072; up to 50 MHz
•
•
•
No DC Blocking Capacitors Required
Integrated Negative Charge Pump
Internal Pop-Free Control For Sample-Rate
Changes Or Clock Halts
•
Intelligent Muting System; Soft Up/Down Ramp
and Analog Mute For 120dB Mute SNR With
Popless Operation.
•
•
Integrated High-Performance Audio PLL With
BCK Reference To Generate SCK Internally
Small 28-pin TSSOP Package
LINE OUT
Current
Segment
DAC
DIN (i2s)
Current
Segment
DAC
Zero
Data
Detector
Advanced Mute Control
Clock Halt
Detection
PCM510x
CPVDD (3.3V)
AVDD (3.3V)
DVDD (3.3V)
GND
LRCK
BCK
Power
Supply
PLL Clock
MCK
UVP/Reset
POR
Ch. Pump
Figure 1. PCM5102-Q1 Functional Block Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
System Two Cascade, Audio Precision are trademarks of Audio Precision.
DirectPath is a trademark of Texas, Instruments, Inc..
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated