Catalog 1308242
Issued 3-03
OEG
PCD/PCDF series
15 Am p Low Profile
Pow er PC Board Relay
Appliances, HVAC, Office Machines
UL File No. E82292
CSA File No. LR48471
TUV File No. R9751117
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Coil Data @ 20°C
Features
• Low profile (10mm), 15 Amp switching capacity.
• 1 Form A contact arrangement.
• Sensitive 200mW coil (250mW on 48VDC coil).
• Immersion cleanable, sealed version available.
• Quick connect terminals available (PCDF).
PCD &PCDF
Rated Coil
Voltage
(VDC)
Nom inal
Current
(m A)
Coil
Resistance
(ohm s) ± 10%
Must Operate Must Release
Voltage
(VDC)
Voltage
(VDC)
5
6
9
12
24
48
40.0
33.3
22.5
17.0
8.6
125
180
400
720
2,880
9,200
3.75
4.50
6.75
9.00
18.00
36.00
0.50
0.60
0.90
1.20
2.40
4.80
Contact Data @ 20°C
Arrangem ents: 1 Form A (SPST-NO).
Material: AgSnO.
Max. Sw itching Rate: 300 ops./min. (no load).
30 ops./min. (rated load).
Expected Mechanical Life: 10 million operations (no load).
Expected Electrical Life: 100,000 operations (rated load).
Minim um Load: 100mA @ 5VDC.
5.2
Initial Contact Resistance: 100 milliohms @ 1A, 6VDC.
Operate Data
Must Operate Voltage: 75% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or more.
Operate Tim e:15 ms max.
Contact Ratings
Ratings: 15A @ 125VAC resistive (PCDF only, load must be carried
through QC terminals to achieve this rating),
10A @ 250VAC resistive,
Release Tim e: 8 ms max.
10A @ 24VDC resistive.
5A @ 125VAC inductive (cosø= 0.4, L/R=7msec),
5A @ 24VDC inductive (cosø= 0.4, L/R=7msec).
Environm ental Data
Tem perature Range:
Max. Sw itched Voltage: AC: 250V.
DC: 24V.
Max. Sw itched Current: 15A.
Max. Sw itched Pow er: 1,800VA, 240W.
Op e rating:-30°C to +70°C
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical: 1,000m/s2 (100G approximately).
Operational: 100m/s2 (10G approximately).
Operating Hum idity: 20 to 85% RH. (Non-condensing).
Initial Dielectric Strength
Betw een Open Contacts: 750VAC 50/60 Hz. (1 minute).
Betw een Coil and Contacts: 2,500VAC 50/60 Hz. (1 minute).
Surge Voltage Betw een Coil and Contacts: 5,000V (1.2 / 50µs).
Initial Insulation Resistance
Betw een Mutually Insulated Elem ents: 1,000M ohms min. @ 500VDCM.
Mechanical Data
Term ination: PCD: Printed circuit terminals.
PCDF: Printed circuit terminals and quick connect terminals.
Enclosure (94V-0 Flam m ability Ratings): Sealed plastic case.
Weight: PCD: 0.31 oz (9g) approximately.
Coil Data
Voltage: 5 to 48VDC.
Nom inal Pow er: 200 mW except 48VDC coil (250mW).
Coil Tem perature Rise: 20°C max., at rated coil voltage.
Max. Coil Pow er: 130% of nominal.
Duty Cycle: Continuous.
PCDF: 0.35 oz (10g) approximately.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
424