P6SMB Series
Vishay General Semiconductor
Surface Mount TRANSZORB® Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in Unidirectional and Bidirectional
• 600 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
DO-214AA (SMB)
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020C, LF max peak
of 260 °C
• Solder Dip 260 °C, 40 seconds
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
MAJOR RATINGS AND CHARACTERISTICS
V(BR) Unidirectional
6.8 V to 540 V
6.8 V to 220 V
600 W
TYPICAL APPLICATIONS
V
(BR) Bidirectional
Use in sensitive electronics protection against voltage
transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of
sensor units for consumer, computer, industrial and
telecommunication.
PPPM
PD
5.0 W
IFSM (Unidirectional only)
Tj max.
100 A
150 °C
MECHANICAL DATA
Case: DO-214AA (SMB)
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002B and JESD22-B102D
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. P6SMB10CA).
Electrical characteristics apply in both directions.
E3 suffix for commercial grade, HE3 suffix for high
reliability grade (AEC Q101 qualified)
Polarity: For unidirectional types the band denotes
cathode end, no marking on bidirectional types
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
Minimum 600
see next table
5.0
UNIT
W
Peak power dissipation with a 10/1000 µs waveform (1,2) (Fig. 1)
Peak pulse current with a 10/1000 µs waveform (1)
Power dissipation on infinite heatsink TA = 50 °C ,
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Operating junction and storage temperature range
A
PD
W
IFSM
100
A
TJ, TSTG
- 65 to + 150
°C
Note:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal
Document Number 88370
08-Sep-06
www.vishay.com
1