5秒后页面跳转
P1115-3SS-1.500M PDF预览

P1115-3SS-1.500M

更新时间: 2024-11-07 05:34:15
品牌 Logo 应用领域
PLETRONICS /
页数 文件大小 规格书
1页 45K
描述
Oscillator

P1115-3SS-1.500M 数据手册

  
Pl tronics, Inc.  
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA  
Manufacturer of High Quality Frequency Control Products  
SQ3315  
P1115-3S  
Tight Tolerance Series  
Full Size, Half Size or Leadless Surface Mount Clock Oscillator  
CMOS with Enable/ Disable, ±15 PPM over Operating Temperature Range  
SM1115B  
First Year Aging Rate of ±3 PPM with ±1 PPM per Year Thereafter at 25°C ±5%  
Economic Alternative to TCXOs for Certain Applications  
1.500 MHz 69.999 MHz  
Standard Specifications  
Overall Frequency Stability  
Operating Temperature Range  
Supply Voltage (Vcc)  
Symmetry (Duty Cycle)  
Logic Levels  
± 15 PPM over Operating Temperature Range  
-
40 to +85°C or 0 to +70°C available  
5.0 volts and 3.3 volts available  
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)  
Logic “1” 90% of Vcc MIN; Logic “0” 10% of Vcc MAX  
Output Load  
Ringing Noise  
Standard load is 15 pF (typ. 1 ASIC) maximum, see Test Circuit 3 (consult factory for heavier loads)  
Depends on frequency and output load. See EMI application note  
Supply Current (Icc)  
Depends on frequency and output load. See SQ3345 Series specification  
Rise and Fall Time (Tr & Tf) Depends on frequency and output load. See SQ3345 Series specification  
Enable/Disable Option (E/D)  
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.  
Part Numbering Guide  
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)  
P1115 - 3S E -- 60.0M - 30 - XXX (Internal Code or blank)  
Packaging  
Non-Std Output Load  
Thru-Hole: Tubes or on Pads,  
Surface Mount: Tubes or  
24mm tape  
Blank = 15 pF max, 30 = 30 pF max, 50 = 50 pF max  
Frequency in MHz  
Special Specifications (choose all that apply)  
Model  
P1115-3S (Full Size)  
SQ3315 (Half Size)  
16mm pitch  
SM1115B (Surface Mount)  
°
Blank: 5.0V ± 10%, 0 to +70 C, 40/60% Symmetry  
°
E: Extended Operating Temperature Range (- 40 to +85 C)  
N: Lower Ringing Noise  
S: 45/55% Symmetry at 50% of Vcc  
V: Supply Voltage of 3.3 volts ±10%  
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.  
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load  
inches (mm)  
Mechanical:  
not to scale  
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.  
P1115-3S  
SM1115B  
SQ3315  
.236 (6.0)  
MAX  
.200 (5.08)  
MAX  
.195 (4.95) MAX  
For Best Performance,  
.031 (0.8)  
Do NOT allow any traces other  
than ground under oscillators  
(Even in buried layers)  
.031 (0.8)  
.020  
(.51)  
.020  
(.51)  
.560 (14.23) MAX  
E/D GND  
.300 (7.62)  
Solder Pads  
.600 (15.24)  
GND  
E/D  
E/D  
GND  
4
3
1
4
1
7
1
2
.05  
(1.3)  
14  
Vcc  
8
4
3
1
2
8
5
OUT  
.200 (5.08)  
Vcc  
Vcc  
OUT  
OUT  
.15 (3.8)  
Jan 2003  
.807 (20.5) MAX  
.492 (12.5) MAX  
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com  
22  
Pl tronics, Inc.