Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
SQ3315
P1115-3S
Tight Tolerance Series
Full Size, Half Size or Leadless Surface Mount Clock Oscillator
CMOS with Enable/ Disable, ±15 PPM over Operating Temperature Range
SM1115B
First Year Aging Rate of ±3 PPM with ±1 PPM per Year Thereafter at 25°C ±5%
Economic Alternative to TCXOs for Certain Applications
–
1.500 MHz 69.999 MHz
Standard Specifications
Overall Frequency Stability
Operating Temperature Range
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
± 15 PPM over Operating Temperature Range
-
40 to +85°C or 0 to +70°C available
5.0 volts and 3.3 volts available
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic “1” 90% of Vcc MIN; Logic “0” 10% of Vcc MAX
Output Load
Ringing Noise
Standard load is 15 pF (typ. 1 ASIC) maximum, see Test Circuit 3 (consult factory for heavier loads)
Depends on frequency and output load. See EMI application note
Supply Current (Icc)
Depends on frequency and output load. See SQ3345 Series specification
Rise and Fall Time (Tr & Tf) Depends on frequency and output load. See SQ3345 Series specification
Enable/Disable Option (E/D)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
P1115 - 3S E -- 60.0M - 30 - XXX (Internal Code or blank)
Packaging
Non-Std Output Load
Thru-Hole: Tubes or on Pads,
Surface Mount: Tubes or
24mm tape
Blank = 15 pF max, 30 = 30 pF max, 50 = 50 pF max
Frequency in MHz
Special Specifications (choose all that apply)
Model
P1115-3S (Full Size)
SQ3315 (Half Size)
16mm pitch
SM1115B (Surface Mount)
°
Blank: 5.0V ± 10%, 0 to +70 C, 40/60% Symmetry
°
E: Extended Operating Temperature Range (- 40 to +85 C)
N: Lower Ringing Noise
S: 45/55% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ±10%
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
inches (mm)
Mechanical:
not to scale
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
P1115-3S
SM1115B
SQ3315
.236 (6.0)
MAX
.200 (5.08)
MAX
.195 (4.95) MAX
For Best Performance,
.031 (0.8)
Do NOT allow any traces other
than ground under oscillators
(Even in buried layers)
.031 (0.8)
.020
(.51)
.020
(.51)
.560 (14.23) MAX
E/D GND
.300 (7.62)
Solder Pads
.600 (15.24)
GND
E/D
E/D
GND
4
3
1
4
1
7
1
2
.05
(1.3)
14
Vcc
8
4
3
1
2
8
5
OUT
.200 (5.08)
Vcc
Vcc
OUT
OUT
.15 (3.8)
Jan 2003
.807 (20.5) MAX
.492 (12.5) MAX
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
22
Pl tronics, Inc.