OPA991-Q1, OPA2991-Q1, OPA4991-Q1
SBOSA12D – MARCH 2020 – REVISED SEPTEMBER 2021
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating ambient temperature range (unless otherwise noted) (1)
MIN
0
MAX
42
UNIT
V
Supply voltage, VS = (V+) – (V–)
Common-mode voltage (3)
(V–) – 0.5
(V+) + 0.5
VS + 0.2
10
V
Signal input pins
Differential voltage (3)
Current (3)
V
–10
–55
–65
mA
Output short-circuit (2)
Continuous
Operating ambient temperature, TA
Junction temperature, TJ
Storage temperature, Tstg
150
150
150
°C
°C
°C
(1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply
functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.
If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully
functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.
(2) Short-circuit to ground, one amplifier per package. This device has been designed to limit electrical damage due to excessive output
current, but extended short-circuit current, especially with higher supply voltage, can cause excessive heating and eventual thermal
destruction. See the Thermal Protection section for more information.
(3) Input pins are diode-clamped to the power-supply rails. Input signals that may swing more than 0.5 V beyond the supply rails must be
current limited to 10 mA or less.
6.2 ESD Ratings
VALUE
±2000
±1000
UNIT
Human-body model (HBM), per AEC Q100-002(1)
Charged-device model (CDM), per AEC Q100-011
V(ESD)
Electrostatic discharge
V
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.
6.3 Recommended Operating Conditions
over operating ambient temperature range (unless otherwise noted)
MIN
2.7
MAX
40
UNIT
V
VS
VI
Supply voltage, (V+) – (V–)
Input voltage range
(V–) – 0.1
–40
(V+) + 0.1
125
V
TA
Specified ambient temperature
°C
6.4 Thermal Information for Single Channel
OPA991-Q1
DBV
(SOT-23)
THERMAL METRIC (1)
UNIT
5 PINS
187.4
86.2
RθJA
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
RθJC(top)
RθJB
54.6
ψJT
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
27.8
ψJB
54.3
RθJC(bot)
N/A
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
Copyright © 2021 Texas Instruments Incorporated
6
Submit Document Feedback
Product Folder Links: OPA991-Q1 OPA2991-Q1 OPA4991-Q1