NW6003
Type II Caller ID Decoder
Data Sheet, January 2000 (Ver 2.0)
File No. NW6003DS(L)
Description
Features
♦
♦
1200 baud Bell 202 and ITU-T V.23 Frequency Shift
Keying (FSK) Demodulation
Compliant with three specifications:
Bellcore GR-30-CORE & SR-TSV-002476
British Telecom (BT) SIN227 & SIN242
The NW6003 device is a single-chip, 3/5 Volt CMOS caller
ID and call waiting detection circuit. It can receive signals
following Bellcore GR-30-CORE & SR-TSV-002476, BT
SIN227 & SIN242, and CCA TW/P&E/312 specifications.
Cable Communication Association (CCA) TW/P&E/312 The NW6003 provides 1200 baud Bell 202 and ITU-T V.23
Bellcore “CPEAlerting Signal (CAS)” and British Telecom FSK demodulation. It allows a microcontroller to extract data
“Idle State and Loop State Tone Alert Signal” detection from it via a serial interface. In addition, the NW6003 offers
♦
♦
♦
Ring and line reversal detection
High sensitivity with -40 dBV input Tone and FSK
Detection
Idle State and Loop State Tone Alert Signal and line reversal
detection capability for BT CLIP, ring burst detection for the
CCA CLIP, and ring and CAS detection for Bellcore CID.
♦
♦
♦
♦
♦
Serial data interface to microcontroller
3 V ±10% or 5 V ±10% operation
Low power CMOS with powerdown mode
Operating temperature range: -40 °C to +85 °C
Packages available:
The device can be used in feature or cordless phones for BT
Calling Line Identity Presentation (CLIP), CCA CLIP and
Bellcore Calling Identity Delivery (CID) systems. It can also
be used in caller ID boxes, modem, fax machines, answer-
ing machines, database query systems and Computer Tele-
phony Integration (CTI) systems.
NW6003-XS 24 pin SOIC
(where ‘X’ is the revision ID)
TRIGIN
TRIGRC
TRIGOUT
OSCIN
OSCOUT
Oscillator
Line Reverse
and
Interrupt
Generator
INT
Ring Detector
3 V/5 V
Detector
STD
Guard Time
ST/GT
VREF
CAP
PWDN
Bias
Generator
Dual Tone
Detector
EST
CD
DCLK
DATA
DR
+
-
IN+
IN-
FSK
Demodulator
Data/Timing
Recovery
GS
FSKEN
MODE
Figure-1. Block Diagram
Integrated Device Technology, Inc.