NW6005
Enhanced Type II Caller ID Decoder
Data Sheet, June 2000 (Ver 3.1)
File No. NW6005DS(L)
Description
Features
The NW6005 device is a single-chip, 3/5 Volt CMOS caller ID
with call waiting detection circuit. It can receive signals follow-
ing Bellcore GR-30-CORE & SR-TSV-002476, BT SIN227 &
SIN242, and ETSI ETS 300 788-1/-2 specifications.
♦
♦
1200 baud Bell 202 and ITU-T V.23 Frequency Shift
Keying (FSK) Demodulation
Compliant with following specifications:
Bellcore GR-30-CORE & SR-TSV-002476
TIA/EIA-716, TIA/EIA-777 Draft
British Telecom (BT) SIN227 & SIN242
ETSI ETS 300 778-1 and -2
Bellcore “CPEAlerting Signal (CAS)”, British Telecom “Idle
State and Loop State Tone Alert Signal” and ETSI “Dual
ToneAlerting Signal (DT-AS)” detection
Two seperate OP amps with adjustable gain for Tip/Ring
and Telephone Hybrid connections
Monitoring of the stop bit for framing error check
Serial FSK data interface with selectable output of bit
stream or 1 byte buffer
The NW6005 provides 1200 baud Bell 202 and ITU-T V.23
FSK demodulation and CAS/DT-AS detection. Two seperate
differential input amplifiers allow the device to be connected
with both Tip/Ring and Telephone Hybrid receive pair. FSK
demodulation is implemented only on Tip/Ring, while DT-AS
(or CAS) detection can be on either Tip/Ring or Hybrid Re-
ceive. In addition, NW6005 provides a serial FSK data inter-
face via which the data can be selected to be processed as a
bit stream or extracted from a 1 byte built-in buffer.
♦
♦
♦
♦
The device can be used in feature or cordless phones for BT
Calling Line Identity Presentation (CLIP), CCA CLIP and
Bellcore Calling Identity Delivery (CID) systems. It can also be
used in caller ID boxes, modem, fax machines, answering
machines, database query systems and Computer Telephony
Integration (CTI) systems.
♦
♦
♦
♦
♦
FSK carrier detection
3 V or 5 V operation
Low power CMOS with intelligent powerdown mode
Operating temperature range: -40 °C to +85 °C
Packages available:
NW6005-XS 20 pin SOIC
(where ‘X’ is the revision ID)
OSCOUT OSCIN
CB0 CB1 CB2
Control Bit
Decoder
Bias
Generator
Oscillator
VREF
IN1+
FSKEN
CASEN MODE
GS1EN
GS2EN
PWDN
PWDN
CASEN
ST/GT
GS1EN
Guard Time
DR/STD
+
-
Dual Tone
Detector
EST
CD
IN1-
GS1
IN2+
DCLK
DATA
+
-
FSK
Demodulator
Data/Timing
Recovery
IN2-
GS2
GS2EN
MODE
FSKEN
Figure-1. Block Diagram
Integrated Device Technology, Inc.