100 MHz Logic Analyzer/Digital Pattern Generators
NI 6542 Bundles, NI 6552 Bundles
• 100 MHz maximum timing and state
clock rate (10 ns)
Operating Systems
• Windows 2000/NT/XP
• 20 to 32 bidirectional data channels per
module (up to 544 channels per system)
• 4 general-purpose I/O channels and
2 clock channels per module
Recommended Software
• LabVIEW
• LabWindows/CVI
• 8 Mb/channel onboard memory
(32 MB total)
Software (included)
• NI-HSDIO driver
• Multiple trigger modes including
capturing numerous waveforms on a
single trigger condition, match on
pattern, and edge
• Pattern generation and logic analysis
connectivity provided by shielded
flying-lead cable
• SignalExpress 1.1
• Digital Waveform Editor
• LabVIEW Express VIs
• Script Editor
• NI 6552 bundles offer per-cycle tristate
and real-time hardware comparison
NI 6542 Bundles
NI 6552 Bundles
Overview
Bus
PXI or PCI
100 MHz
National Instruments logic analyzer and pattern generator bundles give
you the ability to meet the analysis and generation needs of designing,
testing, and debugging digital ICs and electronics. The bundles combine
National Instruments SignalExpress, interactive software that aids in
building programming-free applications, with NI 6542 or NI 6552 100 MHz
digital waveform generator/analyzers. The high-quality flying-lead cable
provides a 50 Ω signal and ground connection all the way to your device
under test (DUT). Each signal and ground pair connects to standard 0.1 in.
headers and the included grabber clips. At a considerable discount,
these bundles provide flexible, powerful hardware and software features
ideal for design and test engineers searching for a low-profile instrument
for complex pattern generation, analysis of timing and state behavior,
and report generation.
Max state and timing rate
Channels
32
20
Voltage levels
Memory
5, 3.3, 2.5, or 1.8 V compatible -2.0 to 5.5 V in 10 mV steps
8 Mb/ch (32 MB)
Connectivity
Software
Flying-lead cable
SignalExpress, Digital Waveform Editor
Stimulus-response features
Low load probing
Price
–
–
ꢀ
ꢀ
$7,699
$9,599
Features
Logic Analyzer
NI 6542 and NI 6552 bundles provide 100 MHz clock rates for analyzing
the timing and state information of a wide range of digital electronics.
The diverse triggering options coupled with the deep memory of the digital
instrument means that you can be certain to capture enough data to
thoroughly analyze and debug your device. With the multirecord triggering,
you can capture data around recurring events without developing
complex sequential triggering or rearming the logic analyzer. NI 6552
bundles offer programmable voltage levels in 10 mV steps, making them
ideal for analyzing a wide range of logic families and for using the device
with the supplied 10:1 passive attenuators.
Choose Your Logic Analyzer Bundle
There are two different bundles to choose from, with each available for
both PCI and PXI. The NI 6542 bundles, which provide 32 channels
compatible with 5.0, 3.3, 2.5, and 1.8 V logic, are designed to drive inputs
or acquire outputs from a circuit or system. If you need flexible voltage
levels (-2.0 to 5.5 V in 10 mV steps), per-cycle control over the direction of
a line for stimulus-response applications, and the ability to passively probe
a circuit using with low loading, choose the NI 6552 bundles.