是否无铅: | 不含铅 | 生命周期: | End Of Life |
零件包装代码: | SOIC | 包装说明: | TSOP, TSOP4,.08 |
针数: | 4 | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8542.39.00.01 |
风险等级: | 5.31 | 可调性: | FIXED |
最大回动电压 1: | 0.75 V | 标称回动电压 1: | 0.5 V |
最大绝对输入电压: | 6.5 V | 最大输入电压: | 6 V |
最小输入电压: | 2.3 V | JESD-30 代码: | R-PDSO-G4 |
JESD-609代码: | e3 | 长度: | 2 mm |
最大电网调整率: | 0.01332% | 最大负载调整率: | 0.04% |
湿度敏感等级: | 1 | 功能数量: | 1 |
输出次数: | 1 | 端子数量: | 4 |
工作温度TJ-Max: | 125 °C | 工作温度TJ-Min: | -40 °C |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
最大输出电流 1: | 0.15 A | 最大输出电压 1: | 1.836 V |
最小输出电压 1: | 1.764 V | 标称输出电压 1: | 1.8 V |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | TSOP |
封装等效代码: | TSOP4,.08 | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE, THIN PROFILE | 包装方法: | TR |
峰值回流温度(摄氏度): | 260 | 认证状态: | Not Qualified |
调节器类型: | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | 座面最大高度: | 1.1 mm |
子类别: | Other Regulators | 表面贴装: | YES |
技术: | CMOS | 端子面层: | Tin (Sn) |
端子形式: | GULL WING | 端子节距: | 1.3 mm |
端子位置: | DUAL | 处于峰值回流温度下的最长时间: | 40 |
最大电压容差: | 2% | 宽度: | 1.25 mm |
Base Number Matches: | 1 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
NCP583SQ25T1 | ONSEMI |
获取价格 |
2.5V FIXED POSITIVE LDO REGULATOR, 0.55V DROPOUT, PDSO4, SC-82AB, 4 PIN | |
NCP583SQ25T1G | ONSEMI |
获取价格 |
Ultra−Low Iq 150 mA CMOS LDO Regulator with Enable | |
NCP583SQ27T1G | ONSEMI |
获取价格 |
Ultra-Low Iq 150 mA CMOS LDO Regulator with Enable | |
NCP583SQ28T1 | ONSEMI |
获取价格 |
2.8V FIXED POSITIVE LDO REGULATOR, 0.4V DROPOUT, PDSO4, SC-82AB, 4 PIN | |
NCP583SQ28T1G | ONSEMI |
获取价格 |
Ultra−Low Iq 150 mA CMOS LDO Regulator with Enable | |
NCP583SQ30T1 | ONSEMI |
获取价格 |
IC VREG 3 V FIXED POSITIVE LDO REGULATOR, 0.4 V DROPOUT, PDSO4, SC-82AB, 4 PIN, Fixed Posi | |
NCP583SQ30T1G | ONSEMI |
获取价格 |
Ultra−Low Iq 150 mA CMOS LDO Regulator with Enable | |
NCP583SQ33T1 | ONSEMI |
获取价格 |
3.3V FIXED POSITIVE LDO REGULATOR, 0.4V DROPOUT, PDSO4, SC-82AB, 4 PIN | |
NCP583SQ33T1G | ONSEMI |
获取价格 |
Ultra−Low Iq 150 mA CMOS LDO Regulator with Enable | |
NCP583XV15T2G | ONSEMI |
获取价格 |
Ultra−Low Iq 150 mA CMOS LDO Regulator with Enable |