NCP4306
Secondary Side
Synchronous Rectification
Driver for High Efficiency
SMPS Topologies
www.onsemi.com
The NCP4306 is high performance driver tailored to control a
synchronous rectification MOSFET in switch mode power supplies.
Thanks to its high performance drivers and versatility, it can be used in
various topologies such as DCM or CCM flyback, quasi resonant
flyback, forward and half bridge resonant LLC.
The combination of externally or fixed adjustable minimum
off-time and on-time blanking periods helps to fight the ringing
induced by the PCB layout and other parasitic elements. A reliable and
noise less operation of the SR system is insured due to the Self
Synchronization feature. The NCP4306 also utilizes Kelvin
connection of the driver to the MOSFET to achieve high efficiency
operation at full load and utilizes a light load detection architecture to
achieve high efficiency at light load.
8
1
1
SOIC−8 NB
TSOP−6
CASE 751−07
CASE 318G−02
MARKING DIAGRAMS
8
1
XXXXX
ALYWX
G
XXXAYWG
The precise turn−off threshold, extremely low turn−off delay time
and high sink current capability of the driver allow the maximum
synchronous rectification MOSFET conduction time and enables
maximum SMPS efficiency. The high accuracy driver and 5 V gate
clamp enables the use of GaN MOSFETs.
G
1
SOIC−8 NB
TSOP−6
IC(Pb−Free)
IC(Pb−Free)
XXXXX = Specific Device Code
Features
A
L
= Assembly Location
= Wafer Lot
• Self−Contained Control of Synchronous Rectifier in CCM, DCM and
QR for Flyback or LLC Applications
Y
W
G
= Year
= Work Week
= Pb−Free Package
• Precise True Secondary Zero Current Detection
• Typically 15 ns Turn off Delay from Current Sense Input to Driver
(Note: Microdot may be in either location)
• Rugged Current Sense Pin (up to 200 V)
• Ultrafast Turn−off Trigger Interface / Disable Input (10.5 ns)
• Adjustable or Fixed Minimum ON−Time
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
• Adjustable or Fixed Minimum OFF-Time with Ringing Detection
• Improved Robust Self Synchronization Capability
• 7 A / 2 A Peak Current Sink / Source Drive Capability
• Operating Voltage Range up to V = 35 V
CC
Typical Applications
• Automatic Light−load Disable Mode
• GaN Transistor Driving Capability
• Low Startup and Disable Current Consumption
• Maximum Operation Frequency up to 1 MHz
• TSOP6 and SOIC-8 Packages
• Notebook Adapters
• High Power Density AC / DC Power
Supplies (Cell Phone Chargers)
• LCD TVs
• All SMPS with High Efficiency
Requirements
• This is a Pb−Free Device
© Semiconductor Components Industries, LLC, 2017
1
Publication Order Number:
December, 2017 − Rev. 1
NCP4306/D