DATA SHEET
www.onsemi.com
Secondary Side Synchronous
Rectification Driver for High
Efficiency SMPS Topologies
1
TSOP−6
SN SUFFIX
CASE 318G−02
NCP4307
The NCP4307 is high performance driver tailored to control a
synchronous rectification MOSFET in switch mode power supplies.
Thanks to its high performance drivers and versatility, it can be used in
various topologies such as DCM or CCM flyback, quasi resonant
flyback and forward.
Internal minimum off−time and on−time blanking periods help to
fight the ringing induced by the PCB layout and other parasitic
elements. A reliable and noise less operation of the SR system is
ensured due to the Self Synchronization feature. The NCP4307 also
utilizes Kelvin connection of the driver to the MOSFET to achieve
high efficiency operation at full load and utilizes a light load detection
architecture to achieve high efficiency at light load.
MARKING DIAGRAM
XXXAYWG
G
1
XXX = Specific Device Code
A
Y
W
= Assembly Location
= Year
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
The precise turn−off threshold, extremely low turn−off delay time
and high sink current capability of the driver allow the maximum
synchronous rectification MOSFET conduction time and enables
maximum SMPS efficiency.
Self−supply capability allows to use NCP4307 in high side
configuration and/or in low output voltage SMPS without auxiliary
winding or other power source.
Features
Typical Applications
• Self−Contained Control of Synchronous Rectifier in CCM, DCM and • Notebook Adapters
QR for Flyback Applications
• Precise True Secondary Zero Current Detection
• High Power Density AC/DC Power Supplies
(Cell Phone Chargers)
• LCD TVs
• Typically 15 ns Turn off Delay from Current Sense Input to Driver
• Rugged Current Sense Pin (up to 200 V)
• All SMPS with High Efficiency
Requirements
• Self−Supply Capability in Case of High Side Operation or Low
V
OUT
• Ultrafast Turn−off Trigger Interface/Disable Input (10.5 ns)
• Internal Minimum ON−Time With Reverse Current Protection
• Internal Minimum OFF−Time with Ringing Detection
• Improved Robust Self Synchronization Capability
• 7 A / 2 A Peak Current Sink / Source Drive Capability
• Operating Voltage Range up to V = 35 V
CC
• Automatic Light−Load Disable Mode
• High Side Operation Capability without External Components or
Auxiliary Winding
• Two VCC Pins Option Allows to Optimize Power Consumption in
Wide V
Range Applications
OUT
• Low Startup and Disable Current Consumption
• TSOP6 Package
• These are Pb−Free Devices
© Semiconductor Components Industries, LLC, 2020
1
Publication Order Number:
NCP4307/D
May, 2022 − Rev. 0