NCP4303A/B
Secondary Side
Synchronous Rectification
Driver for High Efficiency
SMPS Topologies
http://onsemi.com
The NCP4303A/B is a full featured controller and driver tailored to
control synchronous rectification circuitry in switch mode power
supplies. Thanks to its versatility, it can be used in various topologies
such as flyback, forward and Half Bridge Resonant LLC.
The combination of externally adjustable minimum on and off times
helps to fight the ringing induced by the PCB layout and other
parasitic elements. Therefore, a reliable and noise less operation of the
SR system is insured.
The extremely low turn off delay time, high sink current capability
of the driver and automatic package parasitic inductance
compensation system allow to maximize synchronous rectification
MOSFET conduction time that enables further increase of SMPS
efficiency.
MARKING
DIAGRAM
8
8
XXXXX
ALYWX
G
1
SOIC−8
D SUFFIX
CASE 751
1
xx
A
= Specific Device Code
= Assembly Location
WL, L = Wafer Lot
= Year
WW, W = Work Week
YY, Y
Finally, a wide operating V range combined with two versions of
CC
driver voltage clamp eases implementation of the SR system in 24 V
output applications.
G or G = Pb−Free Package
Features
PINOUT INFORMATION
• Self−Contained Control of Synchronous Rectifier in CCM, DCM,
and QR Flyback Applications
• Precise True Secondary Zero Current Detection with Adjustable
Threshold
DRV
V
1
2
3
4
8
7
6
5
CC
Min_Toff
Min_Ton
Trig/Disable
GND
COMP
CS
• Automatic Parasitic Inductance Compensation Input
• Typically 40 ns Turn off Delay from Current Sense Input to Driver
• Zero Current Detection Pin Capability up to 200 V
ORDERING INFORMATION
†
Device
Package
Shipping
• Ultrafast Trigger Interface to External Signal for CCM operation
• Disable Input to Enter Standby or Low Consumption Mode
NCP4303ADR2G
SOIC−8
2500 /
(Pb−Free)
Tape & Reel
• Adjustable Minimum On Time Independent of V Level
CC
NCP4303BDR2G
SOIC−8
2500 /
• Adjustable Minimum Off Time Independent of V Level
CC
(Pb−Free)
Tape & Reel
• 5 A / 2.5 A Peak Current Sink / Source Drive Capability
• Operating Voltage Range up to 30 V
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
• Gate Drive Clamp of Either 12 V (NCP4303A) or 6 V (NCP4303B)
• Low Startup and Standby Current Consumption
• Maximum Frequency of Operation up to 500 kHz
• SOIC−8 Package
• These are Pb−Free Devices
Typical Applications
• Notebook Adapters
• High Power Density AC/DC Power Supplies
• Gaming Consoles
• All SMPS with High Efficiency Requirements
©
Semiconductor Components Industries, LLC, 2010
1
Publication Order Number:
April, 2010 − Rev. 1
NCP4303/D