DATA SHEET
www.onsemi.com
High Performance Current
Mode Resonant Controller
with Integrated High-Voltage
Drivers
16
1
SOIC−16 NB MISSING PINS 2 AND 13
CASE 751DU
NCP13994
MARKING DIAGRAM
16
The NCP13994 is a high performance current mode controller for
half bridge resonant converters. This controller implements
700 V gate drivers, simplifying layout and reducing external
component count. The built−in Brown−Out input function eases
implementation of the controller in all applications. In applications
where a PFC front stage is needed, the NCP13994 features a dedicated
output to drive the PFC controller. This feature together with quiet
skip mode technique further improves light load efficiency of the
whole application. The NCP13994 provides a suite of protection
features allowing safe operation in any application. This includes:
overload protection, over−current protection to prevent hard switching
cycles, brown−out detection, line brown−out, line OVP, X2 cap
discharge, open optocoupler detection, automatic dead−time adjust,
over−voltage (OVP) and over−temperature (OTP) protections.
NCP13994xy
AWLYWWG
1
NCP13994 = Device Code
xy
A
WL
Y
WW
G
= Specific Device Option
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
PIN CONNECTIONS
HV
1
16 VBOOT
15 HB
Features
• Up to 700 V Operating Range for High Side Driver
• Up to 700 V Operating Range for HV Startup Current Source
• Line Brown−out and OVP Protections
• X2 Cap Discharge Function
• Clamped Output Drivers
• Up to 30 V Supply
• High−Frequency Operation from 20 kHz up to 750 kHz
• Current Mode Control Scheme
VBULK
SKIP/REM
LLC FB
3
4
5
6
7
8
14 MUPPER
12 MLOWER
11 GND
LLC CS
OVP/OTP
FB FREEZE
10 VCC
9
PFC MODE
(Top View )
• Automatic Dead−time with Maximum Dead−time Clamp
• Enhanced Startup Sequence for Fast Resonant Tank Stabilization
• Light Load Operation Mode for Improved Efficiency
ORDERING INFORMATION
See detailed ordering and shipping information on page 44 of
this data sheet.
• Quiet Skip Operation Mode for Minimize Transformer Acoustic
Noise
• Off−mode Operation for Extremely Low No−load Consumption
• Latched or Auto−recovery Overload Protection
Features (continued)
• Latched or Auto−recovery Output Short Circuit Protection with
• Pin to Adjacent Pin / Open Pin Fail Safe
• This is a Pb−Free Device
Current Reduction
• Latched Input for Severe Fault Conditions, e.g. OVP or OTP
• Out of Resonance Switching Protection
Typical Applications
• Open Feedback Loop Protection
• Adapters and Offline Battery Chargers
• Flat Panel Display Power Converters
• Computing Power Supplies
• Precise Brown−out Protection
• PFC Stage Operation Control According to Load Conditions
• Startup Current Source with Extremely Low Leakage Current
• Dynamic Self−Supply (DSS) Operation in Off−mode or Fault Modes
• Industrial and Medical Power Sources
© Semiconductor Components Industries, LLC, 2022
1
Publication Order Number:
July, 2022 − Rev. 0
NCP13994/D