5秒后页面跳转
MXP5KE90CTR PDF预览

MXP5KE90CTR

更新时间: 2024-10-28 18:59:55
品牌 Logo 应用领域
美高森美 - MICROSEMI 局域网二极管
页数 文件大小 规格书
4页 175K
描述
Trans Voltage Suppressor Diode, 500W, 90V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN

MXP5KE90CTR 技术参数

是否Rohs认证:不符合生命周期:Obsolete
零件包装代码:DO-41包装说明:O-PALF-W2
针数:2Reach Compliance Code:unknown
ECCN代码:EAR99HTS代码:8541.10.00.50
风险等级:5.8Is Samacsys:N
最大击穿电压:122 V最小击穿电压:100 V
外壳连接:ISOLATED配置:SINGLE
二极管元件材料:SILICON二极管类型:TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95代码:DO-204ALJESD-30 代码:O-PALF-W2
JESD-609代码:e0湿度敏感等级:1
最大非重复峰值反向功率耗散:500 W元件数量:1
端子数量:2封装主体材料:PLASTIC/EPOXY
封装形状:ROUND封装形式:LONG FORM
峰值回流温度(摄氏度):NOT SPECIFIED极性:BIDIRECTIONAL
最大功率耗散:1.19 W认证状态:Not Qualified
参考标准:MIL-19500最大重复峰值反向电压:90 V
表面贴装:NO技术:AVALANCHE
端子面层:TIN LEAD端子形式:WIRE
端子位置:AXIAL处于峰值回流温度下的最长时间:NOT SPECIFIED
Base Number Matches:1

MXP5KE90CTR 数据手册

 浏览型号MXP5KE90CTR的Datasheet PDF文件第2页浏览型号MXP5KE90CTR的Datasheet PDF文件第3页浏览型号MXP5KE90CTR的Datasheet PDF文件第4页 
P5KE5.0 thru P5KE170CA, e3  
500 W TRANSIENT VOLTAGE  
SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This P5KE series is an economical 500 W Transient Voltage Suppressor  
(TVS) for protecting voltage-sensitive components from destruction or  
DO-41  
(DO-204AL)  
degradation.  
It is available in both unidirectional and bi-directional  
configurations as well as RoHS Compliant (annealed matte-Tin Finish) with  
an e3 suffix added to the part number. The response time of their clamping  
action is virtually instantaneous. As a result, they may also be used  
effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-  
4-4 or for inductive switching environments and induced RF. They can also  
be used for protecting other sensitive components from secondary lightning  
effects per IEC61000-4-5 and class levels defined herein. Microsemi also  
offers numerous other TVS products to meet higher and lower power  
demands and special applications.  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
Available in both unidirectional and bidirectional  
(add C or CA suffix to part number for bidirectional)  
Suppresses transients up to 500 watts @ 10/1000 µs  
Protects sensitive components such as IC’s,  
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.  
Selections for 5.0 to 170 V standoff voltage (VWM  
Economical series for thru-hole mounting  
Similar to SA5.0 thru SA170 series  
)
Optional 100% screening for avionics grade is  
available by adding MA prefix to part number for added  
100% temperature cycle -55oC to +125oC (10X) as well  
as surge (3X) and 24 hours HTRB with post test VZ &  
IR (in the operating direction for unidirectional or both  
directions for bidirectional)  
Protection from switching transients & induced RF  
Fast response  
Compliant to IEC61000-4-2 and IEC61000-4-4 for  
ESD and EFT protection respectively  
Options for screening in accordance with MIL-PRF-  
19500 for JAN, JANTX, and JANTXV are also available  
by adding MQ, MX, or MV prefixes respectively to part  
numbers.  
Secondary lightning protection per IEC61000-4-5  
with 42 Ohms source impedance:  
Class 1: P5KE5.0 to P5KE120A or CA  
Class 2: P5KE5.0 to P5KE60A or CA  
Class 3: P5KE5.0 to P5KE30A or CA  
Class 4: P5KE5.0 to P5KE15A or CA  
Surface mount equivalents available as SMAJ5.0 to  
SMAJ170CA (consult factory for other surface mount  
options)  
Moisture classification is Level 1 with no dry pack  
required per IPC/JEDEC J-STD-020B  
Secondary lightning protection per IEC61000-4-5  
with 12 Ohms source impedance:  
RoHS Compliant devices available by adding “e3” suffix  
Class 1: P5KE5.0 to P5KE36A or CA  
Class 2: P5KE5.0 to P5KE18A or CA  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
Operating and Storage Temperature: -65°C to +150°C  
Void-free transfer molded thermosetting epoxy body  
meeting UL94V-0  
Peak Pulse Power: 500 Watts at 10/1000 μs (see Figure  
FINISH: Tin-Lead or RoHS Compliant annealed  
matte-Tin plating readily solderable per MIL-STD-  
750, method 2026  
1, 2 and 3 for tW, waveform and derating effects)  
Impulse repetition rate (duty factor): 0.01%  
Thermal Resistance: 45°C/W junction to leads @ 3/8  
inch (10 mm) from body, or 105°C/W junction to ambient  
when mounted on FR4 PC board with 4 mm2 copper  
pads (1 oz) and track width 1 mm, length 25 mm  
MARKING: Body marked with part number  
POLARITY: Band denotes cathode. Bidirectional  
not marked  
WEIGHT: 0.3 grams (approximate)  
Steady-State Power: 2.77 Watts @ TL=25°C at 3/8 inch  
(10 mm) from body, or 1.19 W at TA = 25ºC on FR4 PC  
board described for thermal resistance  
TAPE & REEL option: Standard per EIA-296 (add  
“TR” suffix to part number)  
Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms  
See package dimensions on last page  
half-sine wave (unidirectional only)  
Solder temperatures: 260 °C for 10 s (maximum)  
Copyright © 2007  
6-20-2007 REV E  
Microsemi  
Page 1  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

与MXP5KE90CTR相关器件

型号 品牌 获取价格 描述 数据表
MXP5KE90E3TR MICROSEMI

获取价格

Trans Voltage Suppressor Diode, 500W, 90V V(RWM), Unidirectional, 1 Element, Silicon, DO-2
MXP5KE90TR MICROSEMI

获取价格

Trans Voltage Suppressor Diode, 500W, 90V V(RWM), Unidirectional, 1 Element, Silicon, DO-2
MXP63RHFFREQ MTRONPTI

获取价格

LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP63RLFFREQ MTRONPTI

获取价格

LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP63RPFFREQ MTRONPTI

获取价格

PECL Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP63RQFFREQ MTRONPTI

获取价格

PECL Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP64RHFFREQ MTRONPTI

获取价格

LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP64RLFFREQ MTRONPTI

获取价格

LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP64RPFFREQ MTRONPTI

获取价格

PECL Output Clock Oscillator, 0.75MHz Min, 800MHz Max,
MXP64RQFFREQ MTRONPTI

获取价格

PECL Output Clock Oscillator, 0.75MHz Min, 800MHz Max,