MSP430F5529, MSP430F5528, MSP430F5527, MSP430F5526, MSP430F5525, MSP430F5524,
MSP430F5529, MSP430F5528, MSP430F5527, MSP430F5526, MSP430F5525, MSP430F5524,
MSP430F5522, MSP430F5521, MSP430F5519, MSP430F5517, MSP430F5515, MSP430F5514,
MSP430F5522, MSP430F5521, MSP430F5519, MSP430F5517, MSP430F5515, MSP430F5514,
MSP430F5513
MSP430F5513
www.ti.com
SLAS590P – MARCH 2009 – REVISED SEPTEMBER 2020
SLAS590P – MARCH 2009 – REVISED SEPTEMBER 2020
MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers
•
•
•
16-bit timer TA2, Timer_A with three capture/
compare registers
16-bit timer TB0, Timer_B with seven capture/
compare shadow registers
Two universal serial communication interfaces
(USCIs)
1 Features
•
Low supply voltage range:
3.6 V down to 1.8 V
•
Ultra-low power consumption
– Active mode (AM):
•
All system clocks active:
– USCI_A0 and USCI_A1 each support:
– 290 µA/MHz at 8 MHz, 3.0 V, flash
program execution (typical)
•
Enhanced UART supports automatic baud-
rate detection
– 150 µA/MHz at 8 MHz, 3.0 V, RAM
program execution (typical)
•
•
IrDA encoder and decoder
Synchronous SPI
– Standby mode (LPM3):
– USCI_B0 and USCI_B1 each support:
•
•
I2C
•
Real-time clock (RTC) with crystal,
watchdog, and supply supervisor
operational, full RAM retention, fast wakeup:
– 1.9 µA at 2.2 V, 2.1 µA at 3.0 V (typical)
Low-power oscillator (VLO), general-
purpose counter, watchdog, and supply
supervisor operational, full RAM retention,
fast wakeup:
Synchronous SPI
•
•
Full-speed universal serial bus (USB)
– Integrated USB-PHY
– Integrated 3.3-V and 1.8-V USB power system
– Integrated USB-PLL
– Eight input and eight output endpoints
12-bit analog-to-digital converter (ADC)
(MSP430F552x only) with internal reference,
sample-and-hold, and autoscan features
Comparator
Hardware multiplier supports 32-bit operations
Serial onboard programming, no external
programming voltage needed
3-channel internal DMA
•
– 1.4 µA at 3.0 V (typical)
– Off mode (LPM4):
Full RAM retention, supply supervisor
•
•
•
•
operational, fast wakeup:
– 1.1 µA at 3.0 V (typical)
– Shutdown mode (LPM4.5):
0.18 µA at 3.0 V (typical)
•
•
•
•
•
•
Wake up from standby mode in 3.5 µs (typical)
16-bit RISC architecture, extended memory, up to
25-MHz system clock
Flexible power-management system
– Fully integrated LDO with programmable
regulated core supply voltage
– Supply voltage supervision, monitoring, and
brownout
Unified clock system
– FLL control loop for frequency stabilization
– Low-power low-frequency internal clock source
(VLO)
– Low-frequency trimmed internal reference
source (REFO)
– 32-kHz watch crystals (XT1)
– High-frequency crystals up to 32 MHz (XT2)
16-bit timer TA0, Timer_A with five capture/
compare registers
Basic timer with RTC feature
Development tools and software (also see Tools
and Software)
•
– LaunchPad™ development kit
(MSP‑EXP430F5529LP)
– MSP430F5529 experimenter’s board
(MSP‑EXP430F5529)
– 80-pin target development board
•
(MSP‑TS430PN80USB)
– 64-pin target development board
(MSP‑TS430RGC64USB)
– USB developers package
(MSP430USBDEVPACK)
– MSP430Ware™ code examples
Device Comparison summarizes the available
family members
•
•
•
2 Applications
16-bit timer TA1, Timer_A with three capture/
compare registers
•
•
•
Analog and digital sensor systems
Data loggers
Connection to USB hosts
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1
Product Folder Links: MSP430F5529 MSP430F5528 MSP430F5527 MSP430F5526 MSP430F5525
MSP430F5524 MSP430F5522 MSP430F5521 MSP430F5519 MSP430F5517 MSP430F5515 MSP430F5514
MSP430F5513
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
