MPI-P10H
MPI-806H
100W AC-DC Power Supply
80W AC-DC ATX Power Supply
Industrial Power Supply
AC-DC
CN
1
TRANSFORMER
N CN1
1
CN2
1
CN
CN4
CN3
12
1
L
12.8
11.53
4.0
1
0.635
0.635
17.05
10.0
4.0
3.05
Use#6-32 screw
Protrusion limit 2.5mmx4
Use #6-32 screw protrusion
limit 3.5mm x 4
0.25
6.5
1.55
Specifications
Specifications
Output
Voltage
Output
Voltage
+5V
+12V
0.1A
2.5A
5A
-12V
+3.3V
0A
+5Vsb
0A
+5V
0.5A
5A
+12V
-12V
+3.3V
0A
+5Vsb
0A
Mini. Output
Current
Rated Output
Current
Min. Output
Current
Rated Output
Current
1A
0A
0.5A
----
1%
0A
0A
0.5A
----
5.5A
8A
4A
0.75A
----
1.5A
3A
4A
0.75A
----
Max. Output
Current (Note 1)
Line
Max. Output
Current (Note 1)
Line
6A
8A
6A
1%
1%
1%
1%
+/-1%
+/-1%
+/-1%
+/-1%
+/-1%
Regulation
Regulation
Load
Regulation
Load
Regulation
2%
4%
5%
4%
4%
2%
4%
5%
4%
4%
Ripple & Noise
p-p (Note 2)
Ripple & Noise
p-p (Note 2)
50mV
120mV
120mV
50mV
120mV
50mV
120mV
120mV
50mV
120mV
Initial Setting 5.08V to
Accuracy (Note 3)
5.13V
11.4V to -11.4V to 3.10V to
12.6V -12.6V 3.50V
4.80V to
5.20V
Initial Setting 5.08V to
5.13V
11.4V to -11.4V to 3.10V to
12.6V -12.6V 3.50V
4.80V to
5.20V
Accuracy (Note 3)
Total Output Power
Total Output Power
100W continuously maximum convection cooling, peak 120W with
80W at 50oC environment temperature (Note 4)
Note:
1) The maximum total combined output power on the +3.3V and +5V rails is 40W
2) Measured by a 20MHz bandwidth limited oscilloscope and the each output is connected
with a 10uF Electrolytic Capacitor and a 0.1uF Ceramic Capacitor
3) The +5V output is set between 5.08V to 5.13V by variable resistor and all output at
60% rated load and the other outputs are checked to be within the accuracy range
4) Total maximum load cannot exceed 80W with 8.6CFM forced air-cooling and 60W
convection cooling
forced air (Note 4)
Note:
1) The maximum total combined output power on the +3.3V and +5V rails is 50W
2) Measured by a 20MHz bandwidth limited oscilloscope and the each output is connected
with a 10uF Electrolytic Capacitor and a 0.1uF Ceramic Capacitor
3) The +5V output is set between 5.08V to 5.13V by variable resistor and all output at
60% rated load and the other outputs are checked to be within the accuracy range
4) Total maximum output power 100W at 25oC and 80W at 50oC convection cooling.
Maximum 100W and peak 120W with 10.2CFM forced air-cooling
Dimensions
12.8 x 8.1 x 4.0 cm, Tolerance +/-0.4mm
Dimensions
17.05 x 8.3 x 4.1 cm, Tolerance +/-0.4mm