LOW-OHM CHIP RESISTORS, 0.1W TO 3W
RESISTORSCAPACITOR
S
C
OILSDELAY LINES
Term.W
is Pb-free
and RoHS
t
compliant
ML SERIES
RoHS
T
Industry’s widest range and lowest cost!
Values as low as 0.0005Ω, current ratings to 60 Amp
High power to size ratio
L
W
RCD’s ML series offers cost-effective solutions for low resistance
applications and are particularly ideal for various types of current
sensing, voltage dividing, battery and pulse circuits, including
linear and switching power supplies, power amplifiers, consumer
electronics, etc. The resistance element is thick film or metal plate,
and is coated with high temperature insulation for exceptional
environmental protection.
Non-inductive
OPTIONS
Option V: 170°C operating temperature range
Option EK: Group A screening per MIL-R-10509
Option EL: Group A & B screening per MIL-R-10509
Max.
Max.
Resistance
Range
Typical TC
(ppm/°C)
Optional TC
(ppm/°C)
RCD Type Wattage * Current *
L
W
T
t
(70°C)
(70°C)
0.02Ω TO 0.049Ω
0.050Ω TO 0.099Ω
400
300
200, 100
200, 100
.040 ± .004
[1.00 ± .1]
.020 ± .004
[.5 ± .1]
.014 ± .004
[.35 ± .1]
.010 ± .004
[.25 ± .1]
ML0402
ML0603
ML0805
ML1206
ML2010
ML2512
0.1W
3A
0.100Ω TO1.0Ω
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.005Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.0005Ω
200
400
300
200
400
300
200
400
300
200
400
300
200
400
300
200
350
200
150
100
200, 100
200, 100
100
.061 ± .005
[1.55 ± .12]
.031 ± .004
[.8 ± .1]
.016 ±. 006
[.40 ± .15]
.012 ± .008
[.3 ± .2]
0.125W
0.25W
0.5W
1W
3.5A
5A
200, 100
200, 100
100
.079 ± .008
[2.0 ± 0.2]
.050 ± .008
[1.25 ± 0.2]
.020 ± .006
[0.5 ± .15]
.024 ± .008
[0.6 ± 0.2]
200, 100
200, 100
100
.126 ± .008
[3.2 ± 0.2]
.063 ± .008
[1.6 ± 0.2]
.020 ± .006
[0.5 ± .15]
.030 ± .018
[0.76 ± .46]
7A
200, 100
200, 100
100
.197 ± .008
[5.0 ± 0.2]
.098 ± .008
[2.5 ± 0.2]
.020 ± .006
[0.5 ± .15]
.032 ± .020
[0.8 ± 0.5]
14A
20A
60A
200, 100
200, 100
100
.250 ± 0.01
126 ± .012
[3.2 ± 0.3]
.024 ± .008**
[0.6 ± .2]
.040 ± .020
[1 ± 0.5]
2W
[6.35 ± 0.25]
200, 100
100, 50
100, 50
.250 ± 0.01
.126 ± .012
[3.2 ± 0.3]
.020~.063**
[0.5 ~ 1.6]
.040~.106**
[1.0 ~ 2.7]
0.00075Ω, 0.001Ω,
0.0015Ω, 0.002Ω
0.0025Ω TO 0.01Ω
MLB2512 2W/ 3W *
[6.35 ± 0.25]
* In order to operate at maximum wattage and current ratings, a suitable substrate or PCB design is required to carry the current and drain the heat. Heavy Cu, large pads and
traces, and/or multilayer PC boards are recommended. MLB2512 has a 3W rating when used with 300mm2 x .0056 Cu pads
** Varies with resistance value (lower values typically have thicker bodies and wider termination pads for increased current carrying capability)
TYPICAL PERFORMANCE CHARACTERISTICS
ML2010
- R01 - J T
W
P/N DESIGNATION:
Characteristics
Thermal Shock (-55° to +155°C)
Short Time Overload (2x [PxR]1/2, 5 sec.)
Low Temp. Operation (-55°C)
High Temp. Exposure (125°C, 100 hrs.)
Resistance to Solder Heat
Moisture Resistance
D R
±1%
±2%
RCD Type
Options: V, EK, EL (leave blank if standard)
±1%
Resis. Code: for 1% tol. use R as decimal point and 3
digits, e.g. R100= 0.1Ω, R200=.2Ω; for 2%-10% use
R and 2 digits , e.g. R10= 0.1Ω, R20= .2Ω, etc. except
if necessary, use additional (significant) digits, e.g.
R005 for 0.005Ω, R0075 for 0.0075Ω in any tolerance
±1%
±0.5%
±1%
Tolerance Code: F=1%, G=2%, J=5%
Load Life(1000 hrs.)
±2%
Packaging: B=Bulk, T=Tape & Reel
Operating Temperature Range
Derating of Wattage & Current
Solderability
-55 to +155°C
1.177%/°C above 70°C
95% Min. Coverage
15 Grams Min.
Optional TC: 50=50ppm, 101=100ppm, 201-200ppm
Termination: W= Lead-free, Q= Tin/Lead (leave blank if
either is acceptable)
Terminal Adhesion
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA009D Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
24