Freescale Semiconductor, Inc.
Data Sheet: Technical Data
Document number: K21P80M50SF4V2
Rev 6, 04/2014
Kinetis K21D Sub-Family Data
MK21DX128AVLK5
MK21DX256AVLK5
MK21DN512AVLK5
Sheet
50 MHz ARM® Cortex®-M4-based Microcontroller
The K21 product family members are optimized for cost-sensitive
applications requiring low-power, USB connectivity, processing
efficiency and the need for extensive tamper protection, such as
Electronic Point of Sales. This device shares the comprehensive
enablement and scalability of the Kinetis family.
This product offers:
• Up to 512 KB of flash memory with up to 64 KB of SRAM
• DryIce Tamper Detection with active/passive pin,
temperature, clock, supply voltage monitoring
• Run power consumption down to 189 μA/MHz and Static
power consumption down to 3.1 μA with full state retention
and 6 μs wakeup. Lowest Static mode down to 359 nA
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO
voltage regulator
80 QFP
12 x 12 x 1.6 mm Pitch 0.5 mm
Performance
• Up to 50 MHz ARM® Cortex®-M4 core with DSP
Communication interfaces
• USB full-/low-speed On-the-Go controller
instructions delivering 1.25 Dhrystone MIPS per MHz
• USB Device Charger detect (USBDCD)
• Two SPI modules
Memories and memory interfaces
• Up to 512 KB of program flash
• Up to 64 KB RAM
• Two I2C modules
• Four UART modules
• I2S module
• 64 KB FlexNVM and 4 KB FlexRAM on FlexMemory
devices
Timers
• 8-channel motor control/general purpose/PWM
timers
• Two 2-channel general purpose timers
• 32-bit PITs and 16-bit low-power timer
• Carrier modulator transmitter
• Real-time clock
System peripherals
• Multiple low-power modes
• 16-channel DMA controller
• External watchdog monitor
• Software watchdog
• Programmable delay block
Clocks
• 32 kHz and 3-32 MHz crystal oscillator
• Multipurpose clock generator
Analog modules
• 16-bit SAR ADC
• Two analog comparators (CMP)
Security and integrity modules
• Hardware CRC module
Operating Characteristics
• Tamper detect and secure storage
• Hardware random-number generator
• Hardware encryption supporting DES, 3DES, AES,
MD5, SHA-1, and SHA-256 algorithms
• 128-bit unique identification (ID) number per chip
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2013–2014 Freescale
Semiconductor, Inc. All rights reserved.