Freescale Semiconductor, Inc.
Data Sheet: Technical Data
Document Number K21P144M120SF5V2
Rev 4, 05/2014
Kinetis K21F Sub-Family Data
MK21FX512AVLQ12
MK21FN1M0AVLQ12
MK21FX512AVMD12
MK21FN1M0AVMD12
Sheet
120 MHz ARM® Cortex®-M4-based Microcontroller with FPU
The K21 product family members are optimized for cost-sensitive
applications requiring low-power, USB connectivity, processing
efficiency with floating point unit and the need for extensive
tamper protection, such as Electronic Point of Sales. It shares
the comprehensive enablement and scalability of the Kinetis
family. This product offers:
• Up to 1 MB of flash memory with up to 128 KB of SRAM
• DryIce Tamper Detection with active/passive pin,
temperature, clock, supply voltage monitoring
• Run power consumption down to 279 μA/MHz. Static
power consumption down to 5.1 μA with full state retention
and 5 μs wakeup. Lowest Static mode down to 268 nA
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO
voltage regulator
144 LQFP
20 x 20 x 1.6 mm Pitch 13 x 13 x 1.7 mm Pitch
0.5 mm 1 mm
144 BGA
Performance
• Up to 120 MHz ARM Cortex-M4-based core with DSP
Communication interfaces
• USB full-/low-speed On-the-Go controller
• USB Device Charger detect
• Controller Area Network (CAN) module
• Three SPI modules
instructions delivering 1.25 Dhrystone MIPS per MHz
Memories and memory interfaces
• Up to 1 MB program flash memory and 128 KB RAM
• FlexBus external bus interface
• Three I2C modules
• Six UART modules
• Secure Digital host controller (SDHC)
• I2S module
System peripherals
• Multiple low-power modes; low leakage wakeup unit
• Memory protection unit with multi-master protection
• 16-channel DMA controller
Timers
• Two 8-channel Flex-Timers (PWM/Motor Control)
• Two 2-channel Flex-Timers (PWM/Quad Decoder)
• Periodic interrupt timers and 16-bit low-power timer
• Carrier modulator transmitter
• External watchdog monitor and software watchdog
Security and integrity modules
• Hardware CRC module
• Real-time clock
• Tamper detect and secure storage
• Hardware random-number generator
• Hardware encryption
• Programmable delay block
Clocks
• 128-bit unique identification (ID) number per chip
• 3 to 32 MHz and 32 kHz crystal oscillator
• PLL, FLL, and multiple internal oscillators
Analog modules
• Two 16-bit SAR ADCs
• Two 12-bit DACs
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Three analog comparators (CMP)
• Voltage reference
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C
Freescale reserves the right to change the detail specifications as may be required to
permit improvements in the design of its products. © 2013–2014 Freescale
Semiconductor, Inc. All rights reserved.