6U CompactPCI® 2nd and 3rd Generation Intel
Core i3/i5/i7 Processor Blade with ECC Support
MIC-3395
Features
NEW
Support 2nd and 3rd Generation Intel® Core™ i3/i5/i7 Processors and Intel
QM67 PCH with embedded graphics (dual independent display)
Up to 16 GB (DDR3 1066/1333/1600) ECC memory (max 8GB on-board
socket SO-UDIMM x1, max 8GB)
Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket
Integrate on-board 2KB NVRAM and min. 8GB flash (optional)
TPM
Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one
PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM)
Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity
PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant
RoHS
COMPLIANT
2002/95/EC
Introduction
Using Intel®'s 2nd and 3rd generation Core™ i3/i5/i7 processors based on 32nm and 22nm process technology supporting up to two Cores / four threads at 2.2 GHz and 4 MB level
2 cache, the MIC-3395 blade boosts computing performance deploying the latest virtualization, techniques and CPU enhancements. Onboard soldered DRAM with ECC support
and optional memory expansion via an SODIMM socket extend the memory to a maximum of 16 GB to support the most demanding applications in high performance or virtualized
environments, supporting up to 4GB per virtual machine. Dual channel design and memory speeds up to 1333MT/s for 2nd generation or 1600MT/s for 3rd generation processors
along with increased cache size and cache algorithms guarantee maximum memory throughput. Combined with the powerful Intel QM67 chipset, these new processors offer improved
I/O performance by leveraging 5GT/s DMI and PCIe interfaces. An onboard XMC/PMC site with PCIe x8 gen.2 connectivity can host high speed offload or I/O mezzanines such
as the MIC-3666 dual 10GE XMC card. With SATA-III support and up to 6Gbps I/O, the latest enhancements in storage technology such as high speed SSDs can be employed. Six
gigabit Ethernet ports for PICMG 2.16, front and rear connectivity ensure best in class network connectivity. The processor’s integrated enhanced graphics engine (HD3000/HD4000)
offers twice the performance over previous generations. With dual independent display support, the MIC-3395 is an ideal fit for demanding workstation or imaging applications.
RASUM features integrated in the CPU and chipset combined with PICMG 2.9, IPMI-based management make the MIC-3395 a highly available and reliable computing engine. The
RIO-3315 RTM module supports one PS/2 connector with both keyboard and mouse ports, two USB ports, two RS-232 ports, two SATA ports, two DVI ports, and two Gigabit Ethernet
ports. In case the SATA disk drives and SATA RAID support of the QM67 do not meet performance and reliability requirements, the RIO-3315 SAS version supports a 4-port SAS
controller with RAID and failover support.
Specifications
CPU
Intel 2nd and 3rd Generation Core i3/i5/i7 up to 2.2 GHz (4MB L2 cache)
Hub Intel QM67
Redundant AMI 8MByte SPI flash
32-bit PCI local bus
64-bit PCI local bus
PICMG2.16 + RTM area
RTM area
Gen2 (5GT/s)
64-bit/66 MHz
Processor System
Platform Controller Hub
BIOS
J1 Connector
J2 Connector
J3 Connector
J4~J5 Connectors
PCIe x8
CompactPCI Interface
XMC/PMC Socket
Memory
PCI
Technology
Max. Capacity
Socket
DDR3 1066/1333/1600 MHz, dual channel with ECC support
Up to 16 GB (8 GB on-board, 8 GB SODIMM)
204-pin SOUDIMM x1
Controller
VRAM
Resolution
Intel embedded graphic controller HD3000/HD4000 (dual independent display)
Dynamic
Up to 2048 x 1536, 64k colors at 75Hz
5 Intel 82574L single-port Gigabit Ethernet controllers (on PCIe x1 channel),
1 Intel 82579LM single-port Gigabit Ethernet controller
10/100/1000 Mbps Ethernet
PICMG 2.16 and RJ-45 x2 (RTM rear panel), RJ-45 x1 (front panel)
1 Intel 82579LM single-port Gigabit Ethernet controller
10/100/1000 Mbps Ethernet
Graphics
Ethernet
Controller
Interface
I/O Connector
Controller
Interface
I/O Connector
Mode
RJ-45 (front panel)
SATA-III
Channels
Mode
Onboard SATA-III connector
SATA-II
2 channels to RTM
1 channel to CFast socket
Storage
Channels
1 channel to on-board flash (optional)
All product specifications are subject to change without notice
Last updated : 28-Jun-2012