6U CompactPCI 3rd Generation
Intel® Core™ i7 Rugged
MIC-3395MIL
Processor Blade with ECC
Features
Supports 3rd Generation Intel® Core™ i3/i5/i7 processors and Intel® QM67
PCH with embedded graphic (dual independent display)
Up to 16 GB (DDR3 1600) ECC memory (max 8GB on board, socket
SO-UDIMM x1, max 8 GB)
Conduction cooled with ANSI/VITA30.1-2002 compliancy
Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket/ on-board
flash (optional)
TPM
Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one
PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM)
Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity
PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant
RoHS
COMPLIANT
2002/95/EC
Introduction
MIC-3395MIL, a CompactPCI PICMG2.16 compliant single slot 6U CPU board, offers with two different configurations that meet a wide range of environmental requirements for
ruggedized application.
Using Intel’s 3rd generation core i7 ULV processors, it offers a low power dissipation design without the need of on-board forced ventilation. Ruggedized requirements are addressed
by a condition cooled design an extended operation temperature range (-40° C ~ 70° C). Shock and vibration resistances of the board are increased by using wedge locks and a
single-piece CNC-milled aluminum alloy plate that conforms to the major IC packages. With highly integrated functional capabilities, the MIC-3395MIL fully utilizes the I/O features
of the Intel chipsets. It supports maximum 16GB of 1600 MHz DDR3 RAM, an onboard 2.5” Serial ATA HDD or SSD, a CFast slot, an onboard NAND flash (as optional), and a set
of I/O functions brought through the backplane to a unique rear transition module, which contains two/four LAN ports, two DVI ports, two USB 2.0, one P/S2 port and one RS-232
port on the front panel.
Specifications
CPU
Intel® 3rd Generation Core i7 ULV up to 2.5 GHz (4MB L2 cache)
Processor System
Platform Controller Hub
BIOS
Intel QM67
Redundant AMI 8MByte SPI flash
J1 Connector
J2 Connector
J3 Connector
J4~J5 Connectors
PCIex8
32-bit PCI local bus
64-bit PCI local bus
PICMG2.16 + RTM area
RTM area
Gen2 (5GT/s)
64-bit/66 MHz
DDR3 1600 MHz, dual channel with ECC support
Up to 16GB (max. 8GB on-board, max. 8GB SODIMM)
CompactPCI Interface
XMC/PMC Socket
Memory
PCI
Technology
Max. Capacity
Socket
204-pin SODIMM x1
Controller
VRAM
Resolution
Controller
Interface
I/O Connector
Controller
Intel embedded graphic controller Iris (triple independent display)
Dynamic
Up to 2048 x 1536, 64k colors at 75Hz
5 Intel 82574L single-port Gigabit Ethernet controllers (on PCIe x1 channel)
10/100/1000Base-TX Ethernet
PICMG 2.16 and RJ-45 x2 (RTM rear panel), RJ-45 x1 (front panel)
1 Intel 82579LM single-port Gigabit Ethernet controller
Graphic
Ethernet
Interface
10/100/1000Base-TX Ethernet
RJ-45 (front panel)
1 2.5" (SATA-III)
Onboard SATA-III connector
I/O Connector
Onboard HDD/SSD
Channels
Onboard Flash
SATA-II
1 CFast socket (SATA-II)
1 soldered NAND Flash (SATA-II optional)
Storage
Channels
RTM
SATA-III
2 SATA-III connectors
1 type A
1
Channels
USB2.0
VGA
COM
LAN
1 RS232 on RJ45
2 10/100/1000 Mbps on RJ45
Front I/O
x1 blue/yellow for Hot Swap/HDD, x1 green for Master/Drone mode, x1 yellow BMC Heartbeat, and x1 green
for Power
CPU reset button and BMC reset button
Front Panel LEDs
Buttons
All product specifications are subject to change without notice
Last updated : 3-Sep-2013