MCP2021/2/1P/2P
LIN Transceiver with Voltage Regulator
Features:
Description:
• The MCP2021/2/1P/2P are Compliant with LIN
Bus Specifications 1.3, 2.1 and are Compliant to
SAE J2602-2
The MCP2021/2/1P/2P provides a bidirectional, half-
duplex communication physical interface to automotive
and industrial LIN systems that meets the LIN bus
specification Revision 2.1 and SAE J2602-2. The
devices incorporate a voltage regulator with 5V at
50 mA or 3.3V at 50 mA regulated power-supply
outputs.
• Support Baud Rates up to 20 kBaudwith
LIN-compatible Output Driver
• 43V Load Dump Protected
• Very Low EMI Meets Stringent OEM Requirements
• Wide Supply Voltage, 6.0V-18.0V Continuous:
- Maximum input voltage of 30V
The regulator is short-circuit protected, and is protected
by an internal thermal shutdown circuit. The device has
been specifically designed to operate in the automotive
operating environment and will survive all specified
transient conditions while meeting all of the stringent
quiescent current requirements.
• Extended Temperature Range: -40 to +125°C
• Interface to PIC® EUSART and Standard USARTs
• Local Interconnect Network (LIN) Bus Pin:
- Internal pull-up resistor and diode
- Protected against ground shorts
The MCP2021/2/1P/2P family of devices includes the
following packages.
- Protected against loss of ground
- High-current drive
8-pin PDIP, DFN and SOIC packages:
• MCP2021-330, LIN-compatible driver, 8-pin, 3.3V
regulator, wake up on dominant level of LBUS
• Automatic Thermal Shutdown
• On-Chip Voltage Regulator:
• MCP2021-500, LIN-compatible driver, 8-pin, 5.0V
regulator, wake up on dominant level of LBUS
- Output voltage of 5.0V with tolerances of
±3% overtemperature range
• MCP2021P-330, LIN-compatible driver, 8-pin,
3.3V regulator, wake up at falling edge of LBUS
voltage
- Available with alternate output voltage of
3.3V with tolerances of ±3% overtemperature
range
• MCP2021P-500, LIN-compatible driver, 8-pin,
5.0V regulator, wake up at falling edge of LBUS
voltage
- Maximum continuous input voltage of 30V
- Internal thermal overload protection
- Internal short circuit current limit
14-pin PDIP, TSSOP and SOIC packages with RESET
output:
- External components limited to filter capacitor
and load capacitor
• MCP2022-330, LIN-compatible driver, 14-pin,
3.3V regulator, RESET output, wake up on
dominant level of LBUS
• Two Low-Power modes:
- Receiver On, Transmitter Off, Voltage
• MCP2022-500, LIN-compatible driver, 14-pin,
5.0V regulator, RESET output, wake up on
dominant level of LBUS
Regulator On ( 85 µA)
- Receiver Monitoring Bus, Transmitter Off,
Voltage Regulator Off ( 16 µA)
• MCP2022P-330, LIN-compatible driver, 14-pin,
3.3V regulator, RESET output, wake up at falling
edge of LBUS voltage
• MCP2022P-500, LIN-compatible driver, 14-pin,
5.0V regulator, RESET output, wake up at falling
edge of LBUS voltage
2005-2014 Microchip Technology Inc.
DS20002018H-page 1