MCP2021/2/1P/2P
LIN Transceiver with Voltage Regulator
Features
Description
• The MCP2021/2/1P/2P are compliant with LIN
Bus Specifications 1.3, 2.0, and 2.1 and are
compliant to SAE J2602
The MCP2021/2/1P/2P provides a bidirectional, half-
duplex communication physical interface to automotive
and industrial LIN systems that meets the LIN bus
specification Revision 2.0. The devices incorporate a
voltage regulator with 5V at 50 mA or 3.3V at 50 mA
regulated power-supply outputs.
• Support Baud Rates up to 20 Kbaud with
LIN-compatible output driver
• 43V Load dump protected
The regulator is short-circuit protected, and is protected
by an internal thermal shutdown circuit. The device has
been specifically designed to operate in the automotive
operating environment and will survive all specified
transient conditions while meeting all of the stringent
quiescent current requirements.
• Very low EMI meets stringent OEM requirements
• Wide supply voltage, 6.0V - 18.0V continuous:
- Maximum input voltage of 30V
• Extended Temperature Range: -40 to +125°C
• Interface to PIC EUSART and standard USARTs
• Local Interconnect Network (LIN) bus pin:
- Internal pull-up resistor and diode
- Protected against ground shorts
- Protected against loss of ground
- High current drive
The MCP2021/2/1P/2P family of devices includes the
following packages.
8-pin PDIP, DFN and SOIC packages:
• MCP2021-330, LIN-compatible driver, 8-pin, 3.3V
regulator, wake up on dominant level of LBUS
• Automatic thermal shutdown
• MCP2021-500, LIN-compatible driver, 8-pin, 5.0V
regulator, wake up on dominant level of LBUS
• On-Chip Voltage Regulator:
- Output voltage of 5.0V with tolerances of
±3% overtemperature range
• MCP2021P-330, LIN-compatible driver, 8-pin,
3.3V regulator, wake up at falling edge of LBUS
voltage
- Available with alternate output voltage of
3.3V with tolerances of ±3% overtemperature
range
• MCP2021P-500, LIN-compatible driver, 8-pin,
5.0V regulator, wake up at falling edge of LBUS
voltage
- Maximum continuous input voltage of 30V
- Internal thermal overload protection
- Internal short circuit current limit
14-pin PDIP, TSSOP and SOIC packages with RESET
output:
- External components limited to filter capacitor
only and load capacitor
• MCP2022-330, LIN-compatible driver, 14-pin,
3.3V regulator, RESET output, wake up on domi-
nant level of LBUS
• Two low-power modes:
• MCP2022-500, LIN-compatible driver, 14-pin,
5.0V regulator, RESET output, wake up on domi-
nant level of LBUS
- Receiver on, Transmitter off, voltage
regulator on (≅ 85 µA)
- Receiver monitoring bus, Transmitter off,
• MCP2022P-330, LIN-compatible driver, 14-pin,
3.3V regulator, RESET output, wake up at falling
edge of LBUS voltage
voltage regulator off (≅ 16 µA)
• MCP2022P-500, LIN-compatible driver, 14-pin,
5.0V regulator, RESET output, wake up at falling
edge of LBUS voltage
© 2005-2012 Microchip Technology Inc.
DS22018F-page 1