Document Number: MC33911
Rev. 4.0, 2/2008
Freescale Semiconductor
Advance Information
LIN System Basis Chip with DC
Motor Pre-driver
33911
The 33911 is a Serial Peripheral Interface (SPI)-controlled System
Basis Chip (SBC) combining many frequently used functions in an
MCU-based system, plus a Local Interconnect Network (LIN)
transceiver. The 33911 has a 5.0V - 60mA low dropout regulator with
full protection and reporting features. The device provides full SPI-
readable diagnostics and a selectable timing watchdog for detecting
errant operation. The LIN Protocol Specification 2.0 compliant LIN
transceiver, has waveshaping circuitry that can be disabled for higher
data rates.
SYSTEM BASIS CHIP WITH LIN
2ND GENERATION
One 60mA high side switch and two 160mA low side switches with
output protection are available for driving resistive and inductive loads.
All outputs can be pulse-width modulated (PWM). Two high-voltage
inputs are available for use in contact monitoring, or as external wake-
up inputs. These inputs can be used as high-voltage analog Inputs.
The voltage on theses pins is divided by a selectable ratio and
available via an analog multiplexer.
AC SUFFIX (Pb-FREE)
98ASH70029A
The 33911 has three main operating modes: Normal (all functions
available), Sleep (VDD off, wake-up via LIN, wake-up inputs (L1,L2),
cyclic sense, and forced wake-up), and Stop (VDD on with limited
current capability, wake-up via CS, LIN bus, wake-up inputs, cyclic
sense, forced wake-up, and external reset).
32-PIN LQFP
ORDERING INFORMATION
Temperature
The 33911 is compatible with LIN Protocol Specification 2.0.
Device
Package
Range (T )
Features
A
• One 60mA high side switch and two 160mA low side switches
• Two high-voltage analog/logic inputs
MC33911BAC/R2
MC34911BAC/R2
-40°C to 125°C
-40°C to 85°C
32-LQFP
• Full-duplex SPI Interface at frequencies up to 4MHz
• LIN transceiver capable of up to 100kbps with wave shaping
• Configurable window watchdog
• 5.0V low drop regulator with fault detection and low-voltage reset (LVR) circuitry
• Pb-free packaging designated by suffix code AC
33911
VBAT
VSENSE
VS1
VS2
HS1
L1
L2
VDD
PWMIN
ADOUT0
LS1
LS2
M
MOSI
MCU
MISO
SCLK
CS
WDCONF
LIN
RXD
TXD
IRQ
LIN INTERFACE
RST
Figure 1. 33911 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2007. All rights reserved.