MC33912G5AC / MC34912G5AC
Document Number: MC33912
Rev. 8.0, 3/2010
Freescale Semiconductor
Advance Information
LIN System Basis Chip with DC
Motor Pre-driver and Current
Sense
33912
The 33912G5/BAC is a Serial Peripheral Interface (SPI) controlled
System Basis Chip (SBC), combining many frequently used functions
in an MCU based system, plus a Local Interconnect Network (LIN)
transceiver. The 33912 has a 5.0 V, 50 mA/60 mA low dropout
regulator with full protection and reporting features. The device
provides full SPI readable diagnostics and a selectable timing
watchdog for detecting errant operation. The LIN Protocol Specification
2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry that
can be disabled for higher data rates.
SYSTEM BASIS CHIP WITH LIN
2ND GENERATION
Two 50 mA/60 mA high side switches and two 150 mA/160 mA low
side switches with output protection are available. All outputs can be
pulse-width modulated (PWM). Four high voltage inputs are available
for use in contact monitoring, or as external wake-up inputs. These
inputs can be used as high voltage Analog Inputs. The voltage on these
pins is divided by a selectable ratio and available via an analog
multiplexer.
AC SUFFIX (Pb-FREE)
98ASH70029A
32-PIN LQFP
The 33912 has three main operating modes: Normal (all functions
available), Sleep (VDD off, wake-up via LIN, wake-up inputs (L1-L4),
cyclic sense and forced wake-up), and Stop (VDD on with limited current
capability, wake-up via CS, LIN bus, wake-up inputs, cyclic sense,
forced wake-up and external reset).
ORDERING INFORMATION
Temperature
The 33912 is compatible with LIN Protocol Specification 2.0, 2.1, and
SAEJ2602-2.
Device
Package
Range (T )
A
MC33912G5AC/R2
MC34912G5AC/R2
MC33912BAC/R2
MC34912BAC/R2
-40°C to 125°C
-40°C to 85°C
-40°C to 125°C
-40°C to 85°C
Features
• Full-duplex SPI interface at frequencies up to 4.0 MHz
• LIN transceiver capable of up to 100 kbps with wave shaping
• Current sense module
32-LQFP
• Four high voltage analog/logic Inputs
• Configurable window watchdog
• Switched/protected 5.0 V output (used for Hall sensors)
* See Page 2 for Device Variations
• Two 50 mA high side and two 150 mA/160 mA low side protected switches
• 5.0 V low drop regulator with fault detection and low voltage reset (LVR) circuitry
• Pb-free packaging designated by suffix code AC
33912
V
BAT
VSENSE
VS1
VS2
HS1
L1
L2
L3
L4
LIN INTERFACE
LIN
VDD
PWMIN
ADOUT0
ADOUT1
MOSI
MISO
SCLK
CS
RXD
TXD
IRQ
LS1
M
LS2
ISENSEH
MCU
ISENSEL
HVDD
HS2
RST
WDCONF
Figure 1. 33912 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2009 - 2010. All rights reserved.