Document Number: MC33910
Rev. 5.0, 12/2008
Freescale Semiconductor
Advance Information
LIN System Basis Chip with High
Side Drivers
33910
The 33910 is a Serial Peripheral Interface (SPI) controlled System
Basis Chip (SBC), combining many frequently used functions in an
MCU based system, plus a Local Interconnect Network (LIN)
transceiver. The 33910 has a 5.0 V, 50 mA low dropout regulator with
full protection and reporting features. The device provides full SPI
readable diagnostics and a selectable timing watchdog for detecting
errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant
LIN transceiver has waveshaping circuitry that can be disabled for
higher data rates.
SYSTEM BASIS CHIP WITH LIN
2ND GENERATION
Two 50 mA high side switches with optional pulse-width modulated
(PWM) are implemented to drive small loads. One high voltage input is
available for use in contact monitoring, or as external wake-up input.
This input can be used as high voltage Analog Input. The voltage on
this pin is divided by a selectable ratio and available via an analog
multiplexer.
The 33910 has three main operating modes: Normal (all functions
available), Sleep (VDD off, wake-up via LIN, wake-up inputs (L1), cyclic
sense and forced wake-up), and Stop (VDD on with limited current
capability, wake-up via CS, LIN bus, wake-up inputs, cyclic sense,
forced wake-up and external reset).
AC SUFFIX (Pb-FREE)
98ASH70029A
32-PIN LQFP
The 33910 is compatible with LIN Protocol Specification 2.0, 2.1, and
SAEJ2602-2.
ORDERING INFORMATION
Temperature
Features
Device
Package
• Full-duplex SPI interface at frequencies up to 4.0 MHz
• LIN transceiver capable of up to 100 kbps with wave shaping
• Two 50 mA high side switches
Range (T )
A
MC33910G5AC/R2
MC34910G5AC/R2
-40°C to 125°C
-40°C to 85°C
32-LQFP
• One high voltage analog/logic Input
• Configurable window watchdog
• 5.0 V low drop regulator with fault detection and low voltage reset (LVR) circuitry
• Switched/protected 5.0 V output (used for Hall sensors)
• Pb-free packaging designated by suffix code AC
33910
V
BAT
VSENSE
HS1
VS1
VS2
L1
VDD
PWMIN
ADOUT0
LIN INTERFACE
LIN
MCU
MOSI
MISO
SCLK
CS
RXD
TXD
IRQ
HVDD
HS2
WDCONF
RST
Figure 1. 33910 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2007-2008. All rights reserved.