MAX9952

更新时间： 2024-11-12 21:54:51

品牌	Logo	应用领域
美信 - MAXIM		/
页数	文件大小	规格书
23页	497K
描述
Dual Per-Pin Parametric Measurement Units

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MAX9952 数据手册

19-3247; Rev 1; 2/05

Dual Per-Pin Parametric

Measurement Units

General Description

Features

♦ Force Voltage/Measure Current (FVMI)

♦ Force Current/Measure Voltage (FIMV)

♦ Force Voltage/Measure Voltage (FVMV)

♦ Force Current/Measure Current (FIMI)

♦ Force Nothing/Measure Voltage (FNMV)

The MAX9951/MAX9952 dual parametric measurement

units (PMUs) feature a small package size, wide force and

measurement range, and high accuracy, making the

devices ideal for automatic test equipment (ATE) and other

instrumentation that requires a PMU per pin or per site.

The MAX9951/MAX9952 force or measure voltages in the

-2V to +7V through -7V to +13V ranges, dependent upon

♦ Force Nothing/Measure Current (FNMI,

Range E Only)

the supply voltage (V

and V ). The devices handle

supply voltages of up to +30V (V

to V ) and a 20V

♦ Termination/Measure Current

♦ Termination/Measure Voltage

device-under-test (DUT) voltage swing at full current. The

MAX9951/MAX9952 also force or measure currents up to

±±6mA with a lowest full-scale range of ±2ꢀA. ꢁntegrated

support circuitry facilitates use of an external buffer ampli-

fier for current ranges greater than ±±6mA.

♦ Five Programmable Current Ranges

±±2µ

±±ꢀ2µ

±±ꢀꢀ2µ

±±mµ

A voltage proportional to the measured output voltage

or current is provided at the MSR_ output. ꢁntegrated

comparators, with externally set voltage thresholds,

provide detection for both voltage and current levels.

The MSR_ and comparator outputs can be placed in a

high-impedance state. Separate FORCE and SENSE

connections are short-circuit protected for voltages

±ꢁ6mµ

♦ -±V to +7V Through -7V to +13V Input-Voltage

Range

♦ Force-Current/Measure-Current µdjustable-

Voltage Offset (IOS)

♦ Programmable Voltage Clamps at Force Output

from (V - 0.3V) to (V

+ 0.3V). The FORCE output

♦ Low-Leakage, High-Impedance Measure, and

also features a low-leakage, high-impedance state.

Force States

ꢁntegrated voltage clamps limit the force output to lev-

els set externally. The force-current or the measure-cur-

rent voltage can be offset -0.2V to +6.6V (ꢁOS). This

feature allows for the centering of the control or mea-

sured signal within the external DAC or ADC range.

♦ 3-Wire Serial Interface

♦ Low ꢁmµ (max) Quiescent Current per PMU

Ordering Information

The MAX9951D/MAX9952D feature an integrated 10k

force-sense resistor between FORCE_ and SENSE_.

The MAX9951F/MAX9952F have no internal force-sense

resistor. These devices are available in a ±6-pin, 10mm

x 10mm, 0.5mm pitch TQFP package with an exposed

8mm x 8mm die pad on the top (MAX9951) or the bot-

tom (MAX9952) of the package for efficient heat

removal. The exposed pad is internally connected to

PµRT

TEMP RµNGE

0°C to +70°C

PIN-PµCKµGE

±6 TQFP-EPR

±6 TQFP-EP

MµX9951DCCB

MAX9951FCCB*

MµX995±DCCB

MAX9952FCCB*

±6 TQFP-EP

*Future product—contact factory for availability.

. The MAX9951/MAX9952 are specified over the

commercial 0°C to +70°C temperature range.

Applications

Selector Guide

Memory Testers

PµRT

DESCRIPTION

ꢁnternal 10k force-sense resistor

External force-sense resistor

ꢁnternal 10k force-sense resistor

External force-sense resistor

VLSꢁ Testers

MAX9951DCCB

MAX9951FCCB

MAX9952DCCB

MAX9952FCCB

System-on-a-Chip Testers

Structural Testers

Pin Configurations appear at end of data sheet.

________________________________________________________________ Maxim Integrated Products

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

12 3 4 5 6 7...23

中文翻译

下载PDF

与MAX9952相关器件

型号	品牌	获取价格	描述	数据表
MAX9952DCCB	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952DCCB+	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952DCCB+T	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952DCCB-D	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952DCCB-T	MAXIM	获取价格	Analog Circuit, BICMOS, PQFP64
MAX9952DCCB-TD	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952FCCB	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952FCCB+	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952FCCB+T	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units
MAX9952FCCB-D	MAXIM	获取价格	Dual Per-Pin Parametric Measurement Units

与MAX9952相关文章

国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

25
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

10
AMD宣布全球裁员约1000人，调整战略聚焦增长
2024-11-14

11
英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

32

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX9952

MAX9952 数据手册

与MAX9952相关器件

与MAX9952相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MAX9952

MAX9952 数据手册

与MAX9952相关器件

与MAX9952相关文章

您还可以找

您在本页遇到什么问题？